Toshiba IK-TF9U Changing each setting in PW SNR mode, Mode = E.TRG E.TRG = PW SNR

Page 17

(1. 3. 3) Changing each setting in PW SNR mode

	Move up down	Set by pushing
	By pushing
		DATA UP, DOWN
	MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	PW SNR
TRG.P
PART	OFF

<MODE = E.TRG E.TRG = PW SNR>

•Sutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at PW SNR and PW SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing the partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

17

Image 17

Contents Following information is only for EU-member states IK-TF9USafety Precautions Disclaimer Table of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Temp LOW Result displayed MeaningAvailable selections Items Controlled by Using on Screen DisplayUsing the Menus Mode Setting by on Screen DisplayShutter Electronic shutter MenusFlicker may be large TRGMode = Manual Changing each setting in Manu modePartial scanning setting Menu UP, DownChanging the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingMode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting 1P SNR, 1P SR, PW SNR, PW SRMode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR modeMode = E.TRG E.TRG = RR Changing each setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing each setting in GainChanging the gain in Manu mode WHT BAL White balance Changing gamma correction MANU/OFFChanging master pedestal Changing R pedestalOption SyncSetting to factory setting status Setting by the frameSetting by 2H Synchro. Scan Operation1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetE. TRG External trigger Fval Lval Dval1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetPulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETLong Term Exposure RR Reset restartInput Timing Chart Example Partial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning onUsing the unit with external sync signal External sync signal polarityExternal Sync External sync frequency rangeHorizontal Output Waveform Timing Chart Output Waveform Timing ChartVertical Output Waveform Timing Chart Fval LVAL、 DvalRGB, 3CCD SpecificationsSymptom Items to be checked External Appearance DiagramBefore Making a Service Call One 1 Year Limited Warranty of Labor and Parts Limited Warranty Toshiba CCD CameraHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities