Toshiba IK-TF9U instruction manual Changing each setting in 1P SR mode, Mode = E.TRG E.TRG = 1P SR

Page 16

(1. 3. 2) Changing each setting in 1P SR mode

	Move up down	Set by pushing
	By pushing
		DATA UP, DOWN
	MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	1P SR
TRG.P
EXP.	50ms
PART	OFF

<MODE = E.TRG E.TRG = 1P SR>

•Sutter mode MANU, SS, E.TRG, RR

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR

•Input trigger pulse setting at 1P SNR and 1P SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•Exposure time setting at 1P SNR and 1P SR

0.01ms0.02 ms 0.4 ms 1 ms20 ms50 ms

0.01 ms	0.02 ms	0.1 ms	1 ms	2 ms
step	step	step	step	step

•Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing 1P SR exposure time setting

1Set the "→" to EXP. by pushing [MENU UP], [MENU DOWN] buttons.

2Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.

(c) Changing the partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

16

Image 16

Contents IK-TF9U Following information is only for EU-member statesSafety Precautions Disclaimer Table of Contents Components Names and Functions Connection Connector Pin AssignmentsStandard Connection Automatic Black Balance OperationWhite Balance Result displayed Meaning Temp LOWItems Controlled by Using on Screen Display Available selectionsMode Setting by on Screen Display Using the MenusMenus Shutter Electronic shutterFlicker may be large TRGChanging each setting in Manu mode Mode = ManualPartial scanning setting Menu UP, DownMode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting 1P SNR, 1P SR, PW SNR, PW SRChanging each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRMode = E.TRG E.TRG = PW SR Changing each setting in PW SR modeMode = E.TRG E.TRG = RR Changing the gain in Manu mode Changing each setting in GainGain Video gain WHT BAL White balance MANU/OFF Changing gamma correctionChanging master pedestal Changing R pedestalSync OptionSetting by the frame Setting to factory setting statusSetting by 2H Synchro. Scan Operation1P SNR 1 Pulse Trigger Sync Non Reset 1 Pulse Trigger SYNC-NON Reset Picture Output TimingE. TRG External trigger Fval Lval Dval1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output TimingPW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingInput Timing Chart Example RR Reset restartLong Term Exposure When Partial Scanning Mode is on Partial ReadPartial Scanning OFF All pixels scanning Partial Scanning onExternal sync signal polarity Using the unit with external sync signalExternal Sync External sync frequency rangeOutput Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Fval LVAL、 DvalSpecifications RGB, 3CCDBefore Making a Service Call External Appearance DiagramSymptom Items to be checked Limited Warranty Toshiba CCD Camera One 1 Year Limited Warranty of Labor and PartsHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities