Toshiba IK-TF9U Gain Video gain, Changing each setting in Gain, Changing the gain in Manu mode

Page 19

( 2 ) GAIN (Video gain)

When the image is dark even if the lens iris is open, change the gain (video gain) to get the proper video level. For the gain adjustment of the unit, MANU (Manual) and OFF (0dB) modes are provided.

1MANU (Manual gain)

Gain adjustment is performed on the GAIN menu. The adjustment range is from 0dB to 18dB in 1dB steps.

2OFF

Gain is fixed at 0dB.

Set the "" to MODE, push the [DATA UP], [DATA DOWN], and select mode among MANU, OFF.

(2. 1) Changing each setting in GAIN

Move up down

Set by pushing

By pushing

DATA UP, DOWN

MENU UP, DOWN

 

-- GAIN --

 

MODE

MANU

MANU

0dB

• Gain mode MANU, OFF

• Manual gain 0 dB to 18 dB (10 dB step)

(a) Changing the gain in MANU mode

1Set the "" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the manual gain by pushing [DATA UP], [DATA DOWN] buttons.

19

Image 19
Contents Following information is only for EU-member states IK-TF9USafety Precautions Disclaimer Table of Contents Components Names and Functions Connection Connector Pin AssignmentsStandard Connection Automatic Black Balance OperationWhite Balance Temp LOW Result displayed MeaningAvailable selections Items Controlled by Using on Screen DisplayUsing the Menus Mode Setting by on Screen DisplayTRG MenusShutter Electronic shutter Flicker may be largeMenu UP, Down Changing each setting in Manu modeMode = Manual Partial scanning settingMode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting1P SNR, 1P SR, PW SNR, PW SR Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Changing 1P SR exposure time settingMode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR modeMode = E.TRG E.TRG = PW SR Changing each setting in PW SR modeMode = E.TRG E.TRG = RR Changing the gain in Manu mode Changing each setting in GainGain Video gain WHT BAL White balance Changing R pedestal MANU/OFFChanging gamma correction Changing master pedestalOption SyncSynchro. Scan Operation Setting by the frameSetting to factory setting status Setting by 2HFval Lval Dval 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing E. TRG External trigger1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetPulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETInput Timing Chart Example RR Reset restartLong Term Exposure Partial Scanning on When Partial Scanning Mode is onPartial Read Partial Scanning OFF All pixels scanningExternal sync frequency range External sync signal polarityUsing the unit with external sync signal External SyncFval LVAL、 Dval Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Vertical Output Waveform Timing ChartRGB, 3CCD SpecificationsBefore Making a Service Call External Appearance DiagramSymptom Items to be checked Your Responsibilities Limited Warranty Toshiba CCD CameraOne 1 Year Limited Warranty of Labor and Parts How to Obtain Warranty Service Step-By-Step Procedures