Toshiba IK-TF9U instruction manual WHT BAL White balance

Page 20

( 3 ) WHT BAL (White balance)

WHT BAL has two modes; AWB, MANU.

Set the "→" to MODE, push the [DATA UP], [DATA DOWN], and select mode among AWB, MANU.

(3. 1) Changing each setting in AWB (Automatic White Balance) mode

Move up down

Set by pushing

By pushing

DATA UP, DOWN

MENU UP, DOWN

-- WHT BAL --

MODE

AWB

• White balance mode setting (AWB, MANU)

R GAIN

0

Automatically adjusting value for red gain and blue gain

B GAIN

0

are shown on the screen

C.TEMP

3200

* These values may not be changed during AWB mode.

• Color temperature setting 3200, 5600

(a) Changing color temperature setting

1Set the "→" to C.TEMP by pushing [MENU UP], [MENU DOWN] buttons.

2Select either 3200 or 5600 by pushing [DATA UP], [DATA DOWN] buttons.

(3. 2) Changing each setting in MANU (Manual) mode

Move up down By pushing

MENU UP, DOWN

Set by pushing

DATA UP, DOWN

-- WHT BAL --
MODE	MANU
R GAIN	0
B GAIN	0
C. TEMP	3200

•White balance mode AWB, MANU

•Red gain adjustment -100 to 100

•Blue gain adjustment -100 to 100

•Color temperature setting 3200, 5600

(a) Changing the red gain

1Set the "→" to R GAIN by pushing [MENU UP], [MENU DOWN] buttons.

2Set the red gain by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing the blue gain

1Set the "→" to B GAIN by pushing [MENU UP], [MENU DOWN] buttons.

2Set the blue gain by pushing [DATA UP], [DATA DOWN] buttons.

20

Image 20

Contents IK-TF9U Following information is only for EU-member statesSafety Precautions Disclaimer Table of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Result displayed Meaning Temp LOWItems Controlled by Using on Screen Display Available selectionsMode Setting by on Screen Display Using the MenusMenus Shutter Electronic shutterFlicker may be large TRGChanging each setting in Manu mode Mode = ManualPartial scanning setting Menu UP, DownChanging the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting 1P SNR, 1P SR, PW SNR, PW SRChanging each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRMode = E.TRG E.TRG = RR Changing each setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing each setting in GainChanging the gain in Manu mode WHT BAL White balance MANU/OFF Changing gamma correctionChanging master pedestal Changing R pedestalSync OptionSetting by the frame Setting to factory setting statusSetting by 2H Synchro. Scan Operation1P SNR 1 Pulse Trigger Sync Non Reset 1 Pulse Trigger SYNC-NON Reset Picture Output TimingE. TRG External trigger Fval Lval Dval1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output TimingPW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingLong Term Exposure RR Reset restartInput Timing Chart Example When Partial Scanning Mode is on Partial ReadPartial Scanning OFF All pixels scanning Partial Scanning onExternal sync signal polarity Using the unit with external sync signalExternal Sync External sync frequency rangeOutput Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Fval LVAL、 DvalSpecifications RGB, 3CCDSymptom Items to be checked External Appearance DiagramBefore Making a Service Call Limited Warranty Toshiba CCD Camera One 1 Year Limited Warranty of Labor and PartsHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities