Sony EVI-D30 Decide the position and size of the Frame, To cancel the MD function

Page 19

2 Press the FRAME button to enter into the detection frame setting mode.

MD MODE

FRAME DRIVE

SET FRAME

 

FRAME 1

 

3 Decide the position and size of the FRAME 1.

qPress the arrow button to set the position of the FRAME 1. Then press the FRAME button.

MD MODE

FRAME DRIVE

SET FRAME

 

FRAME 1

 

wPress the arrow button to set the size of the FRAME 1. Then press the FRAME button.

MD MODE

FRAME DRIVE

SET FRAME

 

FRAME 1

 

That completes the settings of the FRAME 1’s position and size, and enter into the setting mode of the FRAME 2.

If you choose not to set the FRAME 2, proceed with the step 5.

4 Repeat the procedure of the step 3 to set the FRAME 2’s position and size.

5 Repeat pressing the DETECT button to select a frame to be used.

Each time that button is pressed, the frame to be used is cyclically changed as follows:

FRAME 1

FRAME 2

F1 & F2*

MD MODE

FRAME DRIVE

 

SET FRAME

 

 

F1&F2

 

 

*If a change is detected even in either of FRAME 1 or FRAME 2, the lamp at the side of the lens lights up red.

6 Press the START/STOP button to activate the MD function.

MD MODE

WORKING NOW

FRAME 1

To turn off the setting value and/or frame

If the setting value and/or frame are displayed as you record a picture, those come with the recorded picture.

To turn off the setting value, press the DATA

SCREEN button.

To turn off the frame, press the FRAME DISPLAY button.

To cancel the MD function

Press the START/STOP button.

To exit from the MD mode, press the MD ON/

OFF button.

Note

Once the frame is set, it remains memorized until the power is turned off.

To retain the memory of the frame setting even if the power is turned off, set the BACKUP switch, at the rear of the camera head, to ON. (See “About backup” on page 25.)

continue to next page 19EN

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Operating Instructions Color Video CameraPour les utilisateurs au Canada Owner’s RecordFor customers in the U.S.A For the customers in CanadaAls de kleuren-videocamera niet meer werkt Features Table of Contents Connections Installation Turn on the Power switch at the rear of the main unit Turning on the PowerSetting the Clock Installing batteriesTo turn off the clock display, press Having the clock displayedIf you accidentally move the camera with your hand Pan/ Tilt Operation10EN To face the camera back to the front11EN Adjusting the Camera12EN Having the Camera Memorize the SettingButtons 1 Canceling the preset memory Recalling the memorized setting13EN 14EN Tracking a Subject AutomaticallyTo keep the size of the memorized subject as is To turn off the setting value and/or frameTo cancel the AT function If the frame is repeatedly extended to the full screenPress the OFF SET button to fix the frame position Fine-tuning the setting16EN Changing the frame positionPressing the arrow button to move Have the camera memorize a subject bySubject into the frame 18EN Detecting Change Taking Place PicturePress the START/STOP button to activate the AT function Decide the position and size of the Frame To cancel the MD functionPress the START/STOP button to activate the MD function 20EN Fine-tuning the settingsPress the Menu button to enter into 21EN Adjust each parameterPress the Menu button to complete the setting Adjusting the value of each parameter22EN Locations of ControlsRemote commander 24EN AT setting mode 14MD setting mode 18 MD adjusting modePrecautions Replacing the batteries of the remote commander MaintenanceTroubleshooting Cleaning the main unit27EN Specifications
Top Page Image Contents