Sony EVI-D30 Having the clock displayed, To turn off the clock display, press

Page 9

4 Repeat the steps 2 and 3 to set the other time elements in the order of month, date, hour, and minute.

The clock starts operating as you press the TIME button to set the minute.

EVI-D30

JUL 4 1996 3:15:01 PM

EVI-D31

47 1996

15:15:01

Having the clock displayed

You can select the clock display from either time or date.

To have the time displayed, press the TIME button.

To have the date displayed, press the DATE

button.

To turn off the clock display, press the

corresponding button again.

Note

When the POWER switch on the main unit is set to OFF, the clock will be as originally was. To retain the memory of the clock setting even if the power is turned off, set the BACKUP switch, at the rear of the camera head, to ON. (See “About backup” on page 25.)

9EN

Image 9

Contents Operating Instructions Color Video CameraFor customers in the U.S.A Owner’s RecordFor the customers in Canada Pour les utilisateurs au CanadaAls de kleuren-videocamera niet meer werkt Features Table of Contents Connections Installation Setting the Clock Turning on the PowerInstalling batteries Turn on the Power switch at the rear of the main unitTo turn off the clock display, press Having the clock displayed10EN Pan/ Tilt OperationTo face the camera back to the front If you accidentally move the camera with your hand11EN Adjusting the CameraHaving the Camera Memorize the Setting 12ENButtons 1 Recalling the memorized setting Canceling the preset memory13EN 14EN Tracking a Subject AutomaticallyTo cancel the AT function To turn off the setting value and/or frameIf the frame is repeatedly extended to the full screen To keep the size of the memorized subject as is16EN Fine-tuning the settingChanging the frame position Press the OFF SET button to fix the frame positionHave the camera memorize a subject by Pressing the arrow button to moveSubject into the frame Detecting Change Taking Place Picture 18ENPress the START/STOP button to activate the AT function To cancel the MD function Decide the position and size of the FramePress the START/STOP button to activate the MD function Fine-tuning the settings 20ENPress the Menu button to enter into Press the Menu button to complete the setting Adjust each parameterAdjusting the value of each parameter 21EN22EN Locations of ControlsRemote commander MD setting mode 18 AT setting mode 14MD adjusting mode 24ENPrecautions Troubleshooting MaintenanceCleaning the main unit Replacing the batteries of the remote commander27EN Specifications