Sony EVI-D30 operating instructions Connections

Page 6

Preparations

Connections

Connect your Color Video Camera to a personal computer, TV or VCR equipped with an audio/ video input. Some connections may require extra cables. Refer to the instructions manual of the equipment to be connected.

		Microphone
		(not supplied)
to MIC
to AUDIO	Audio/Video	to Audio
to AUDIO	cable (supplied)	input (black)
OUT (black)	cable (supplied)	input (black)
OUT (black)
to VIDEO	S-Video cable	to Video input
OUT (yellow)	S-Video cable
OUT (yellow)	(not supplied)
	(not supplied)	(yellow)
		(yellow)

to S VIDEO OUT	to S-Video input
VISCA cable (not supplied)*
	to RS-232C
to VISCA IN

to VISCA OUT	To VISCA IN of other
	EVI-D30
	(in case of connecting
	to more cameras)

Personal computer, TV or VCR with an audio/ video input jack

AC power adaptor AC-EV2	to AC outlet
(supplied with EVI-D30)

to DC IN 13.5V

AC power adaptor AC-EV3 (supplied with EVI-D31)

*When the video camera is connected to a personal computer with a VISCA cable, you can operate the video camera with the personal computer.

6EN

Image 6

Contents Color Video Camera Operating InstructionsFor the customers in Canada Owner’s RecordFor customers in the U.S.A Pour les utilisateurs au Canada Als de kleuren-videocamera niet meer werkt Features Table of Contents Connections Installation Installing batteries Turning on the PowerSetting the Clock Turn on the Power switch at the rear of the main unitHaving the clock displayed To turn off the clock display, pressTo face the camera back to the front Pan/ Tilt Operation10EN If you accidentally move the camera with your handAdjusting the Camera 11ENHaving the Camera Memorize the Setting 12ENButtons 1 Recalling the memorized setting Canceling the preset memory13EN Tracking a Subject Automatically 14ENIf the frame is repeatedly extended to the full screen To turn off the setting value and/or frameTo cancel the AT function To keep the size of the memorized subject as isChanging the frame position Fine-tuning the setting16EN Press the OFF SET button to fix the frame positionHave the camera memorize a subject by Pressing the arrow button to moveSubject into the frame Detecting Change Taking Place Picture 18ENPress the START/STOP button to activate the AT function To cancel the MD function Decide the position and size of the FramePress the START/STOP button to activate the MD function Fine-tuning the settings 20ENPress the Menu button to enter into Adjusting the value of each parameter Adjust each parameterPress the Menu button to complete the setting 21ENLocations of Controls 22ENRemote commander MD adjusting mode AT setting mode 14MD setting mode 18 24ENPrecautions Cleaning the main unit MaintenanceTroubleshooting Replacing the batteries of the remote commanderSpecifications 27EN