Precautions
•The name plate indication operating voltage, power consumption, etc. is located on the bottom exterior.
•After operating the unit with an AC power adaptor, disconnect the AC power adaptpr from the wall outlet if the set is not to be used for an extended period of time. The POWER switch on the rear of the main unit, does not turn the AC adaptor off.
Brightness of a subject
Color Video Camera might not work with its best performance in a place where brightness exceeds the illumination range (such as a place exposed to direct sunlight).
Avoid specialized application
Avoid using Color Video Camera for monitoring application where it would be forced to focus on a stationary object for a long period of time. Also avoid focusing the camera on an extremely bright object such as sunlight or a fluorescent lamp. Otherwise the color filter might be damaged.
Precaution on copyright
Television programs, pictures, magazines, and other materials may be copyrighted. Unauthorized recording or storing of such materials violates the provision of the copyright laws.
When you discard Color Video Camera
For environmental reasons, take out a lithium battery from the camera and discard it accordingly.
1Remove the screw at the rear of the camera head using a Phillips type screw driver and detach the cabinet.
w
q
2Remove the stopper and connector.
Stopper
Connector
3Remove the lithium battery together with the board.
Dispose of the lithium battery according to the local law.
About backup
The memories of the settings such as the clock, camera's position and MD function are erased when the POWER switch on the main unit is set to OFF. To retain those memories, set the BACK UP switch, at the rear of the camera head, to ON.
BACKUP
OFF 
ON
Notes
•In this unit, the
•To recharge the battery, plug in the unit to an AC outlet with the AC power adaptor and leave it for approximately 48 hours with the POWER switch on the main unit set to ON.
25EN