Sony EVI-D30 operating instructions Specifications, 27EN

Page 27

Specifications

System

Video signal	EVI-D30: NTSC Color, EIAJ
	standards
	EVI-D31: PAL Color, CCIR
	standards
Picture element	1/3 inch color CCD
	(Total picture element number:
	EVI-D30: Approx. 410,000
	EVI-D31: Approx. 470,000)
	(Effective picture element number:
	EVI-D30: Approx. 380,000
	EVI-D31: Approx. 440,000)
Lens	Electromotion twelve fold zoom lens
	f=5.4 to 64.8mm, F1.8 to F2.7
	Horizontal angle: 4.4° to 48.8°
Point-blank range

WIDE end : 10mm

TELE end : 800mm

Minimum illumination

7 lux (F1.8)/with 50IRE

Illumination range
	7 to 100,000 lux
Shutter speed	EVI-D30: 1/60 to 1/10,000 (VISCA
	control)
	EVI-D31: 1/50 to 1/10,000 (VISCA
	control)
Gain selector	Automatic/manual
Horizontal resolution
	NTSC : 460 TV
	PAL : 450 TV
Video S/N	48 dB
Pan/tilt action	Horizontal: 100°, Vertical: 25°

Input/output terminals

Video output	RCA pin jack (1), 1Vpp, 75 ohm
	unbalanced
	Synchronization: negative
S video output	4 pin mini DIN (1)
Audio output	RCA pin jack, monaural (1)
	Rated output: 327 mV
	Output impedance: less than

2.2kilohms

Input/output control terminals

RS232C (input: 1, output: 1), 8 pin mini DIN, 9600bps

Data: 8 bit

Stop bit: 1

Microphone input terminal

	Mini jack (monaural) (1) (ø 3.5)
	Rated input 0.775 mV
	DC 3V for low impedance
	microphone
	Input impedance: more than 10
	kilohms
Power terminal	EIAJ type4

General

Input voltage	DC 12 to 14 V
Power consumption
	11 W
Operating temperature
	0° to 40° (32° to 104°F)
Storage temperature	– 20° to 60° (– 4° to 140°F)
	– 20° to 60° (– 4° to 140°F)
Dimensions	Video camera: Approx 142 × 109 ×
	164 mm (5 5/8 × 4 3/8 × 6 1/2 in.)
	(w/h/d)
	Remote commander: Approx.
	56 × 26 × 210 mm (2 1/4 × 1 1/16 ×
	8 3/8 in.) (w/h/d)
Mass	Video camera: Approx. 1,200 g
	(42.3 oz.)
	Remote commander: Approx.
	109 g (3.8 oz)

Supplied accessories

AC power adaptor (1)

Audio/video cable (1)

Remote commander (1)

Velcro tape (3 sets)

27EN

Image 27

Contents Operating Instructions Color Video CameraPour les utilisateurs au Canada Owner’s RecordFor customers in the U.S.A For the customers in CanadaAls de kleuren-videocamera niet meer werkt Features Table of Contents Connections Installation Turn on the Power switch at the rear of the main unit Turning on the PowerSetting the Clock Installing batteriesTo turn off the clock display, press Having the clock displayedIf you accidentally move the camera with your hand Pan/ Tilt Operation10EN To face the camera back to the front11EN Adjusting the CameraHaving the Camera Memorize the Setting 12ENButtons 1 Recalling the memorized setting Canceling the preset memory13EN 14EN Tracking a Subject AutomaticallyTo keep the size of the memorized subject as is To turn off the setting value and/or frameTo cancel the AT function If the frame is repeatedly extended to the full screenPress the OFF SET button to fix the frame position Fine-tuning the setting16EN Changing the frame positionHave the camera memorize a subject by Pressing the arrow button to moveSubject into the frame Detecting Change Taking Place Picture 18ENPress the START/STOP button to activate the AT function To cancel the MD function Decide the position and size of the FramePress the START/STOP button to activate the MD function Fine-tuning the settings 20ENPress the Menu button to enter into 21EN Adjust each parameterPress the Menu button to complete the setting Adjusting the value of each parameter22EN Locations of ControlsRemote commander 24EN AT setting mode 14MD setting mode 18 MD adjusting modePrecautions Replacing the batteries of the remote commander MaintenanceTroubleshooting Cleaning the main unit27EN Specifications