Turning on the Power
1 Turn on the POWER switch at the rear of the main unit.
The POWER lamp lights up.
As long as the POWER switch on the main unit is set to ON, you can turn on or off the camera with the POWER switch on the remote commander.
When the power is turned on, the camera will automatically face toward the lower right- hand side and then the front, which is the home position of the camera. (Pan/tilt reset action)
Light up.
2 Turn on the peripheral devices.
Installing batteries
R6 (size AA) x 2 (not supplied)
Setting the Clock
Use the buttons on the main unit to set the clock.
DATE TIME
DATE TIME
1 Press the DATE and TIME buttons at the same time and hold them down for about 2 seconds. Release your hand as the month and date appear and the year starts flashing.
JAN 1 1996
1 1 1996
2 Repeat pressing the DATE button to select the year.
3 Press the TIME button to set the year.
JAN 1 1996
1 1 1996
8EN