Sony EVI-D30 Owner’s Record, For customers in the U.S.A, For the customers in Canada

Page 2

Owner’s Record

The model number and the serial number are located on the bottom exterior.

Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon the dealer regarding this product.

Model No.

Serial No.

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

WARNING

Mains cord must only be changed at qualified service shop.

Appratet er forsynet med en speciel netledning, der kun ma udskiftes af et autoriseret serviceværksted.

For customers in the U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Y o u a r e c a u t i o n e d t h a t a n y c h a n g e s o r modifications not expressly approved in this manual could void your authority to operate this equipment.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) i n s t r u c t i o n s i n t h e l i t e r a t u r e accompanying the appliance.

* The graphical symbols are on the bottom enclosure.

For the customers in Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Pour les utilisateurs au Canada

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

2EN

Image 2
Contents Color Video Camera Operating InstructionsFor the customers in Canada Owner’s RecordFor customers in the U.S.A Pour les utilisateurs au CanadaAls de kleuren-videocamera niet meer werkt Features Table of Contents Connections Installation Installing batteries Turning on the PowerSetting the Clock Turn on the Power switch at the rear of the main unitHaving the clock displayed To turn off the clock display, pressTo face the camera back to the front Pan/ Tilt Operation10EN If you accidentally move the camera with your handAdjusting the Camera 11ENButtons 1 Having the Camera Memorize the Setting12EN 13EN Recalling the memorized settingCanceling the preset memory Tracking a Subject Automatically 14ENIf the frame is repeatedly extended to the full screen To turn off the setting value and/or frameTo cancel the AT function To keep the size of the memorized subject as isChanging the frame position Fine-tuning the setting16EN Press the OFF SET button to fix the frame positionSubject into the frame Have the camera memorize a subject byPressing the arrow button to move Press the START/STOP button to activate the AT function Detecting Change Taking Place Picture18EN Press the START/STOP button to activate the MD function To cancel the MD functionDecide the position and size of the Frame Press the Menu button to enter into Fine-tuning the settings20EN Adjusting the value of each parameter Adjust each parameterPress the Menu button to complete the setting 21ENLocations of Controls 22ENRemote commander MD adjusting mode AT setting mode 14MD setting mode 18 24ENPrecautions Cleaning the main unit MaintenanceTroubleshooting Replacing the batteries of the remote commanderSpecifications 27EN