Sony EVI-D30 operating instructions Installation

Page 7

If you have a personal computer or audio/video equipment with the S-Video input

You can connect it to your Color Video Camera with a commercially available S-video cable.

Notes

•You cannot connect your Color Video Camera to a personal computer that is not equipped with either audio/ video input or S-Video input jack. And you might not be able to use your existing personal computer with your Color Video Camera unless you provide the computer with a video capture board, sound board, and/or software. Consult your computer dealer or manufacturer for details.

•Use only the AC-EV2 (for EVI-D30)/AC-EV3 (for EVI- D31) AC power adaptor (supplied). Do not use any other AC power adaptor.

Polarity of the plug

Installation

Be sure to place the main unit on a flat surface.

Secure the camera in place with the supplied Velcro tape.

•Do not grasp the camera head when carrying the video camera.

•Do not turn the camera head manually. Doing so will result in the camera malfunctioning.

If you operate more than one camera with the remote commander

Notice the CAMERA NO. switch at the rear of the main unit. Set the CAMERA NO. switch to the position that is different from the positions to that of what the other cameras' CAMERA NO. switches are set.

(See page 11.)

CAMERA NO.

1 2 3

7EN

Image 7

Contents Operating Instructions Color Video CameraPour les utilisateurs au Canada Owner’s RecordFor customers in the U.S.A For the customers in CanadaAls de kleuren-videocamera niet meer werkt Features Table of Contents Connections Installation Turn on the Power switch at the rear of the main unit Turning on the PowerSetting the Clock Installing batteriesTo turn off the clock display, press Having the clock displayedIf you accidentally move the camera with your hand Pan/ Tilt Operation10EN To face the camera back to the front11EN Adjusting the Camera12EN Having the Camera Memorize the SettingButtons 1 Canceling the preset memory Recalling the memorized setting13EN 14EN Tracking a Subject AutomaticallyTo keep the size of the memorized subject as is To turn off the setting value and/or frameTo cancel the AT function If the frame is repeatedly extended to the full screenPress the OFF SET button to fix the frame position Fine-tuning the setting16EN Changing the frame positionPressing the arrow button to move Have the camera memorize a subject bySubject into the frame 18EN Detecting Change Taking Place PicturePress the START/STOP button to activate the AT function Decide the position and size of the Frame To cancel the MD functionPress the START/STOP button to activate the MD function 20EN Fine-tuning the settingsPress the Menu button to enter into 21EN Adjust each parameterPress the Menu button to complete the setting Adjusting the value of each parameter22EN Locations of ControlsRemote commander 24EN AT setting mode 14MD setting mode 18 MD adjusting modePrecautions Replacing the batteries of the remote commander MaintenanceTroubleshooting Cleaning the main unit27EN Specifications