Millennium Enterprises Integrated Modeling Amplifier manual Delays, Detuner Parameters, Dtn E -H

Johnson Millennium

Section - 4 Editing Modules

When do I use a detuner? The detuner falls into the same guidelines as the chorus effect. It works with just about everything; It is ideal for thickening up a rhythm guitar track. Remember to experiment with the delay parameters if you are looking for a wider detuning sound. Adding 30-60 ms of delay to the detuner's voices that are panned hard to one side (while not delaying the other side) will change the detuner's stereo imaging greatly.

Detuner Parameters

FX: Lvl	Controls the signal input level fed to the module. Ranges from Off to 100%.
Dry: Lvl	Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Balance	Controls the positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right).
Dtn A - B	Controls the detuning amount for detuner voices A and B. Higher detune settings produce a more dissonant sound.
	Ranges from -50% to 50%.
Dtn C - D	Controls the detuning amount for detuner voices C and D. Ranges from -50% to 50%.
Dtn E -H	Controls the detuning amount for detuner voices E through H. Ranges from -50% to 50%.
Dly A - B	Controls the amount of time before detuner voices A and B are heard. Higher delay time settings produce a short
	slapback delay effect. Ranges from 0 to 60 milliseconds.
Dly C - D	Controls the amount of time before detuner voices C and D are heard. Ranges from 0 to 60 milliseconds.
Dly E - H	Controls the amount of time before detuner voices E through H are heard. Ranges from 0 to 60 milliseconds.
Out A - B	Adjusts the overall level of detuner voice A or B. Ranges from Off to 100%.
Pan A - B	Controls the stereo soundfield placement of detuner voice A or B. Ranges from -99 (all left) to 99 (all right).
Out C - D	Adjusts the overall level of detuner voice C or D. Ranges from Off to 100%.
Pan C - D	Controls the stereo soundfield placement of detuner voice C or D. Ranges from -99 (all left) to 99 (all right).
Out LA - LB	Adjusts the left side level of detuner voice A or B. Ranges from Off to 100%.
Out RA - RB	Adjusts the right side level of detuner voice A or B. Ranges from Off to 100%.
Spread	Controls the width of the effect’s stereo imaging. The higher the setting, the wider the image. The lower the setting,
	the more monophonic the effect becomes. Ranges from 1 to 10.

Delays

A delay produces discrete, repeating echoes of the source material at a specified interval. In digital delays, the input signal is "sampled" or

User Guide

49