Millennium Enterprises Integrated Modeling Amplifier manual

Section - 6 The J-12 Foot Controller

Johnson Millennium

5.Now to assign the CC number, just turn the <4> knob until you have reached the desired CC. The display will now read something like this:

	J12 FC:Bank FS=Tog CCTran
2								￿￿
	1			1￿						127
			2			3	6		4
	LINK CHANGED		LINK CHANGED			LINK	CHANGED		LINK CHANGED
		WAH TUBE EQ				GATE
											L/R OUTS
FACTORY USER					#DIGITAL
PAGE10 OF16 b
						CLIP					L/R OUTS

6. Press the <Preset> button to exit the Foot controller setup menu.

Assigning MIDI Control to the Expression Pedals

This series of menus and submenus allows MIDI setup of the Expression pedals of the J-12. There are two procedures you must do in order for the Expression pedals to work properly with MIDI:

1.Assign CC Number

2.CC Transmit Channel

Assign CC Number to Expression Pedals - This option allows you to choose the MIDI CC numbers you want to use for sending continuous control messages using any one of the 4 expression pedal options. These assignments can be done on pages 11 and 12 of the Utility menu. From the Factory, the expression pedal(s) are not pre-assigned to any MIDI CC number. To assign which CC number is sent from the expression pedal(s), do the following.

1. Press the <Utility> button once. The display appears something like this:

Stereo

Cab: 4x12 Tuner

2

￿￿

2

1

2

3

2

4

Off

LINK CHANGED

LINK CHANGED

LINK

CHANGED

LINK CHANGED

WAH

TUBE EQ

GATE

L/R OUTS

FACTORY USER

#DIGITAL

PAGE 1 OF 16 b

CLIP

L/R OUTS

2. Turn the <Page> knob until you reach page 11 and the display will appear something like this:

CCSnd: Exp1 Exp2￿￿

2	1		2	OFF		3	OFF	4
	LINK CHANGED	LINK CHANGED				LINK CHANGED		LINK CHANGED
		WAH		TUBE EQ		GATE
									L/R OUTS
FACTORY USER					#DIGITAL
PAGE11 OF 16 b
						CLIP

72

User Guide