Snapshot Mode Selection, Snapshot Recording

JVC GR-DVL9200 specifications Snapshot Mode Selection, Snapshot Recording, Motor Drive Mode

Page 16

16ENRECORDING

BasicRecording(cont.)

SNAPSHOT

Button

	5S
	OFF
	Y
	A
	LP
Power	Lock Button
Switch

SNAP MODE Button

MULTI SCREEN Button

Display

Snapshot

Use your camcorder like a regular camera and take a snapshot, or several of them in succession.

This feature lets you record still images that look like photographs onto a tape.

SNAPSHOT MODE SELECTION

1 Set the Power Switch to “” or “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

2 Choose the appropriate Snapshot mode from the 5 available by repeatedly pressing SNAP MODE until the desired snapshot mode indicator appears.

SNAPSHOT RECORDING

1 Press SNAPSHOT.

If you press during Record-Standby . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the normal recording resumes.

To Use The Flash (☞ pg. 22) . . .

.... slide FLASH OPEN in the direction of the arrow

printed on the camcorder. The flash is raised. If the flash is not needed, push down the flash.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

FUL L Snapshot mode

NOTES:

●To remove the shutter sound, ☞ “BEEP/TALLY” on pg. 20.

●Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom. However, the flash will not fire.

●In Multi-Analyser 4 or Multi-Analyser 9, the flash is disabled (☞ pg. 22).

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Program AE with special effects (☞ pg. 25) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●During playback as well, all Snapshot modes are available. The shutter sound is not heard.

●To reduce the Red-Eye effect in the subject’s eyes when the flash fires, ☞ pg. 22.

●When a headphone set is connected to the PHONE connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.

Image 16

Contents

GR-DVL9200 It is recommended that you Dear CustomerConnection to the mains supply in the United Kingdom EN3 Before recording an important sceneCD-ROM Outside of the Core Filter as shown in the illustration EN5Wind the cable so that it is not slack Power Charging the Battery PackLithium-ion is vulnerable in colder temperatures About BatteriesUsing the Battery Pack Using AC PowerTo Detach The Battery Pack EN7Date/Time Settings Loading/Unloading a Cassette EN9Grip Adjustment Recording Mode Setting10 EN Viewfinder Adjustment Shoulder Strap AttachmentTripod Mounting EN1112 EN Power Switch PositionRecording Basic Recording Journalistic Shooting EN13 Interface Shooting Slide the Power Zoom Lever towards T 14 ENBasic Recording ZoomShooting EN15Partway through the tape Snapshot Mode Selection Motor Drive ModeSnapshot Snapshot RecordingMulti Screen Mode EN17If you press Multi Screen during recording To Return To The Normal ScreenUsing Menus For Detailed Adjustment Recording Advanced Features18 EN EN19 Mode MenuOn Next Advanced Features DATE/TIME SystemSelf-Timer EN21Eyes Always fires Perform the procedure below Snapshot FlashFires automatically if it is dark Appears If Auto Is SelectedFlash Brightness Adjustment Down the Lock Button located on the switch, thenEN23 Fully Press MENU/BRIGHT. The Menu Screen appears24 EN Second Recording SceneProgram AE With Special Effects To Deactivate The Selected ModeEN25 26 EN Fade/Wipe EffectsPicture Wipe or Dissolve Selection To Deactivate The Selected EffectEN27 MenuFocusing 28 ENAuto Focus Manual FocusExposure Control Iris LockEN29 To Return To Automatic Iris ControlWhite Balance Adjustment 30 ENManual White Balance Operation To Return To Automatic White BalanceTo Control The Speaker Volume Available only with the RM-V716U remote control provided pgBasic Playback EN3132 EN PlayMode DateSound Mode Playback SoundDisplay EN33When connecting the cables, open this cover Basic ConnectionsEN35 36 EN Playback Advanced ConnectionsConnection To a Personal Computer Make sure the camcorder and PC are turned offEN37 Connection To a Video Unit Equipped With a DV ConnectorMake sure all units are turned off Tape Dubbing 38 ENVCR Recording deck Digital Dubbing EN39Installing The Batteries 40 ENButtons EN41Functions EN Using the Remote Control Unit EN43 To allow you to add creative effects to the playback imageSET REMOTE/VCR Code 44 ENYou are now ready to try Random Assemble Editing JVC VCR equipped with a remote pause connector EN45Make Connections VCR other than aboveSelect Scenes 46 ENFADE/WIPE EN47 Automatic Editing to VCR48 EN For More Accurate EditingDiagnosing VCR/CAMCORDER Timing Recording deckAdjustment of VCR/CAMCORDER Timing EN49Set 12BIT Mode to Sound 2 or MIX Menu Screen pg 50 ENAudio Dubbing To hear the dubbed sound during playbackEN51 Corrective ActionEN Troubleshooting ContSymptom Possible Causes When shooting fast-moving Subject or during rapid Panning Possible Causes Optional cleaning cassette Cleaning The Camcorder Press and hold BATT. Release and remove the battery packAfter Use EN5758EN 5 6EN59 60 EN IndicationsLCD Monitor/Viewfinder Indications During Recording AUTO, ManualLCD Monitor/Viewfinder Indications During Playback EN61Indikator Function FunctionTo prolong service life To avoid hazardsDuring use Store cassettesEN63 64 EN Wide Mode Wind Cut Wipe In/Out Zooming EN65Playback Zoom Time CodeFor Connectors 66 ENCamcorder For GeneralAC Power Adapter/Charger AA-V67EG or AA-V67EK EN67VTR AA-V67EGGR-DVL9200

JVC GR-DVL9200 specifications Snapshot Mode Selection, Snapshot Recording, Motor Drive Mode