JVC GR-DVL9200 specifications Optional cleaning cassette

56ENTROUBLESHOOTING

(cont.)

SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
38. The LCD monitor image is	38. • During playback of the	38.
distorted.	unrecorded portion, High-
	speed Search and still	————
	playback, LCD monitor
	indications appear distorted.
	This is not a defect.
39. Images on the LCD monitor	39. • The speaker volume is too	39. • Turn the speaker volume
are jittery.	great.	down (☞ pg. 31).
40. Blocks of noise appear	40.	40. •Clean the video heads with an
during playback, or there is	————	optional cleaning cassette
no playback picture and the		(☞ pg. 63).
screen becomes blue.
41. The LCD monitor, the	41.	41. • Wipe them gently with soft
viewfinder and the lens have	————	cloth. Wiping strongly can
become dirty (ex.		cause damage (☞ pg. 57).
fingerprints).
42. An unusual mark appears.	42.	42. • Check the section of the
	————	manual that explains LCD
		monitor/viewfinder indica-
		tions (☞ pg. 60, 61).
43. An error indication	43. • A malfunction of some kind	43. • Remove the power supply
(E01 — E06) appears.	has occurred. In this case the	(battery pack, etc.) and wait a
	camcorder’s functions become	few minutes for the indication
	unusable.	to clear. When it does, you
		can resume using the
		camcorder. If the indication
		remains even though you
		repeat the above two or three
		times, please consult your
		nearest JVC dealer.
44. The charger indicator on the	44. • The temperature of the battery	44. • To protect the battery, it is
AC Power Adapter/Charger	is extremely high/low.	recommended to charge it in
does not light.	• Charging is difficult in places	places with a temperature of
	subject to extremely high/low	10°C to 35°C (☞ pg. 62).
	temperatures.
45. Picture does not appear on	45. • The viewfinder is pulled out.	45. • Push the viewfinder back in.
the LCD monitor.	• The LCD monitor's brightness	• Adjust the brightness of the
	setting is too dark.	LCD monitor (☞ pg. 12).
		• If the monitor is tilted upward
		180 degrees, open the
		monitor fully (☞ pg. 13).
46. When the image is printed	46. • This is not a malfunction.	46. • By recording with “DIS”
from the printer, a black bar		activated (☞ pg. 19) this can
appears at the bottom of the		be avoided.
screen.
47. When the camcorder is	47. • The DV cable was plugged/	47. • Turn the camcorder’s power
connected via the DV	unplugged with power turned	off and on again, then operate
connector, the camcorder	on.	it.
does not operate.
48. During transport, the lens	48.	48. • Do not subject the camcorder
cover opens.		to shock or excessive
	————	vibration during transport.
		• Turn the camcorder on and
		off. The lens cover closes.