JVC GR-DVL9200 specifications Basic Playback, EN31, To Control The Speaker Volume

Page 31

PLAYBACK

BasicPlayback

EN31

Power

 

 

Y OFF

Switch

 

 

 

A

 

P

L

 

 

 

 

5S

 

Lock Button

Power Zoom Lever (VOL.)

Speaker

 

 

 

Play/Pause Button (4/6)

 

Rewind Button (2)

Fast-Forward Button (3)

 

 

 

Stop Button (5)

1 Load a tape (☞ pg. 9).

2 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2to rewind, or 3 to fast-forward the tape during Stop mode.

To Control The Speaker Volume . . .

.... slide the Power Zoom Lever (VOL.) towards “+” to

turn up the volume, or towards “–” to turn down the volume.

Still Playback: Pauses during playback.

1)Press 4/6 during playback.

2)To resume normal playback, press 4/6again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automati- cally engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●When 4/6 is pressed, the image may not pause immediately while the camcorder stabilizes the still image. During this time, if PAUSE (6) on the remote control is pressed, Slow-Motion Playback will start. This is not a malfunction.

Shuttle Search: Allows high-speed search in either direction.

1)Press 3for forward or 2for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Slow-Motion Playback, Frame-By-Frame

Playback, Playback Zoom and

Playback Special Effects

Available only with the RM-V716U remote control (provided) (☞ pg. 42, 43).

PLAYBACK

NOTES:

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off

automatically. To turn on again, set the Power Switch to “OFF”, then to “ ”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (☞ pg. 34).

●You can also view the playback picture on the LCD monitor with it flipped over and retracted.

●LCD monitor/viewfinder indications:

•When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.

When power is supplied through the DC cord: “ ” does not appear.

•During Stop mode, none of the indications are displayed.

●Copyguarded tapes cannot be played back. Only a blue screen is displayed.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents GR-DVL9200 It is recommended that you Dear CustomerConnection to the mains supply in the United Kingdom Before recording an important scene EN3CD-ROM Outside of the Core Filter as shown in the illustration EN5Wind the cable so that it is not slack About Batteries PowerCharging the Battery Pack Lithium-ion is vulnerable in colder temperaturesEN7 Using the Battery PackUsing AC Power To Detach The Battery PackDate/Time Settings EN9 Loading/Unloading a CassetteGrip Adjustment Recording Mode Setting10 EN EN11 Viewfinder AdjustmentShoulder Strap Attachment Tripod Mounting12 EN Power Switch PositionRecording Basic Recording Journalistic Shooting EN13Interface Shooting Zoom Slide the Power Zoom Lever towards T14 EN Basic RecordingShooting EN15Partway through the tape Snapshot Recording Snapshot Mode SelectionMotor Drive Mode SnapshotTo Return To The Normal Screen Multi Screen ModeEN17 If you press Multi Screen during recordingUsing Menus For Detailed Adjustment Recording Advanced Features18 EN EN19 Mode MenuOn Next DATE/TIME System Advanced FeaturesEN21 Self-TimerIf Auto Is Selected Eyes Always fires Perform the procedure belowSnapshot Flash Fires automatically if it is dark AppearsFully Press MENU/BRIGHT. The Menu Screen appears Flash Brightness AdjustmentDown the Lock Button located on the switch, then EN23Second Recording Scene 24 ENProgram AE With Special Effects To Deactivate The Selected ModeEN25 To Deactivate The Selected Effect 26 ENFade/Wipe Effects Picture Wipe or Dissolve SelectionMenu EN27Manual Focus Focusing28 EN Auto FocusTo Return To Automatic Iris Control Exposure ControlIris Lock EN29To Return To Automatic White Balance White Balance Adjustment30 EN Manual White Balance OperationEN31 To Control The Speaker VolumeAvailable only with the RM-V716U remote control provided pg Basic PlaybackDate 32 ENPlay ModeEN33 Sound ModePlayback Sound DisplayBasic Connections When connecting the cables, open this coverEN35 Make sure the camcorder and PC are turned off 36 ENPlayback Advanced Connections Connection To a Personal ComputerEN37 Connection To a Video Unit Equipped With a DV ConnectorMake sure all units are turned off Tape Dubbing 38 ENVCR Recording deck EN39 Digital Dubbing40 EN Installing The BatteriesButtons EN41Functions EN Using the Remote Control Unit To allow you to add creative effects to the playback image EN43SET REMOTE/VCR Code 44 ENYou are now ready to try Random Assemble Editing VCR other than above JVC VCR equipped with a remote pause connectorEN45 Make ConnectionsSelect Scenes 46 ENFADE/WIPE Automatic Editing to VCR EN47Recording deck 48 ENFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingEN49 Adjustment of VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen pg50 EN Audio DubbingCorrective Action EN51Cont EN TroubleshootingSymptom Possible Causes When shooting fast-moving Subject or during rapid Panning Possible Causes Optional cleaning cassette EN57 Cleaning The CamcorderPress and hold BATT. Release and remove the battery pack After Use5 6 58ENEN59 AUTO, Manual 60 ENIndications LCD Monitor/Viewfinder Indications During RecordingFunction LCD Monitor/Viewfinder Indications During PlaybackEN61 Indikator FunctionStore cassettes To prolong service lifeTo avoid hazards During useEN63 64 EN Time Code Wide Mode Wind Cut Wipe In/Out ZoomingEN65 Playback ZoomFor General For Connectors66 EN CamcorderAA-V67EG AC Power Adapter/Charger AA-V67EG or AA-V67EKEN67 VTRGR-DVL9200
Top Page Image Contents