JVC GR-DVL9200 specifications Playback Sound, Display, EN33, Sound Mode

EN33

Playback Sound

During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg. 32, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the desired parameter.

			SOUND L	Sound from the “L” channel is output in stereo.
SOUND MODE		SOUND R		Sound from the “R” channel is output in stereo.
			STEREO	Sound is output on both “L” and “R” channels in stereo.
			SOUND 1	Original sound is output on both “L” and “R” channels in stereo.
12BIT MODE			SOUND 2	Dubbed sound is output on both “L” and “R” channels in stereo.
			MIX	Original and dubbed sounds are combined and output in stereo on
				both “L” and “R” channels in stereo.
	: Factory-preset

NOTES:

●The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)

●The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.

PLAYBACK

Display

1 2B I T / SOUND1 SP

						Minutes
						Seconds
	2 5 . 1 2 . 0 0					Frames*
INDICATION setting:	1 6 : 4 0	TC 1	2 : 3	4 : 2	4
	DISPLAY setting:	TIME CODE setting:				* 25 frames
For playback sound and	For date/time.	For time code.
tape speed.						= 1 second