JVC GR-DVL9200 specifications When shooting fast-moving Subject or during rapid Panning

54ENTROUBLESHOOTING

(cont.)

SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
21. Scene transition does not go	21. • When using “Picture Wipe/	21.
as expected.	Dissolve” (☞ pg. 26) or
	“Dissolve during 5-second
	recording mode” (☞ pg. 24),
	there is a delay of a fraction of
	a second between the previous
	record stop-point and the	————
	Dissolve start-point. This is
	normal, but this slight delay
	becomes especially noticeable
	when shooting fast-moving
	subject or during rapid
	panning.
22. The Video Echo mode does	22. • The Picture Wipe or	22. • Set “WIDE MODE” to
not work.	Dissolve functions are in use.	“CINEMA” or “OFF” mode
	• “WIDE MODE” is set to	(☞ pg. 19).
	“SQUEEZE” in the Menu	• Do not try to use the Video
	Screen.	Echo mode during a scene
	• A Fade-In or Fade-Out is in	transition (☞ pg. 24 – 26).
	progress.
	• Dissolve during 5-second
	recording mode is in use.
23. Even when Slow Shutter is	23. • When shooting in the dark, the	23. • If you want the lighting to
not selected, the image looks	unit becomes highly sensitive	look more natural, set GAIN
like it is activated.	to light and the image takes on	UP to “AGC” or “OFF” in the
	an effect similar to Slow	Menu Screen (☞ pg. 19).
	Shutter.
24. There is no strobe when the	24. • The Picture Wipe or Dissolve	24. • Do not try to use the Classic
Classic Film or Strobe mode	function is in use.	Film or Strobe mode during a
is activated.	• Dissolve during 5-second	scene transition (☞ pg. 24 –
	recording mode is in use.	26).
25. White Balance cannot be	25. • The Sepia or Monotone mode	25. • Turn off Sepia or Monotone
activated.	is activated.	before setting White Balance
		(☞ pg. 25, 30).
26. When shooting a subject	26. • This is a result of exceedingly	26.
illuminated by bright light,	high contrast, and is not a	————
vertical lines appear.	malfunction.
27. When the screen is under	27. • This is not a malfunction.	27.
direct sunlight during
shooting, the screen		————
becomes red or black for an
instant.
28. During recording, the date/	28. • “DISPLAY” is set to “OFF” in	28. • Set “DISPLAY” to “ON” in the
time does not appear.	the Menu Screen.	Menu Screen (☞ pg. 20).
	• Interface Shooting is per-	• During Interface Shooting, the
	formed.	date/time does not appear
		(☞ pg. 13).
29. The indicators and messages	29. • The Menu Screen settings are	29. • Set “INDICATION”, “ON
do not appear.	preventing the indications from	SCREEN”, “DISPLAY” and/or
	appearing.	“TIME CODE” to “ON” in the
		Menu Screen (☞ pg. 20, 32).