JVC GR-DVL9200 specifications 32 EN, Play, Mode, Date, Display

32EN

MENU/BRIGHT Dial

		Y OFF
	A
P	L

PLAYBACKAdvancedFeatures

Using Menus For Detailed Adjustment

The following procedure applies to all except Synchro Comp (☞ pg. 48, 49).

		5S
		Lock Button
		Power Switch
Recording Start/Stop Button
Display
PLAY MODE		Menu Screen
1RETURN
SOUND MODE ST EREO
1 2B I T MODE	SOUND	L
SYNCHRO	SOUND R

DATE / D I SP LAY

1RE TURN
I ND I CAT I ON	ON
D I SP LAY	OF F
T I ME CODE

1

2

3

4

5

66

Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

Press MENU/BRIGHT. The Menu Screen appears.

Rotate MENU/BRIGHT to select the desired function icon, and press it. The selected function menu appears.

Rotate MENU/BRIGHT to select the desired function, and press it to display the Sub Menu.

Rotate MENU/BRIGHT to select the desired parameter and press it. Selection is complete.

When the highlight bar is on “1RETURN”, press MENU/BRIGHT twice to close the Menu Screen.

	SOUND MODE	☞ pg. 33.
PLAY	12BIT MODE	☞ pg. 33.
MODE	SYNCHRO	☞ pg. 49.
	INDICATION	Makes the playback sound mode and tape speed appear/disappear on the
		camcorder.
DATE/	DISPLAY	Makes the date/time appear/disappear on the camcorder.
DISPLAY	TIME CODE	ON: Makes the time code appear on the camcorder.
		OFF (factory-preset): Makes the time code disappear on the camcorder.

NOTES:

●If “INDICATION” is set in the “DATE/DISPLAY” Menu (☞ pg. 20), “INDICATION” in the “DATE/TIME” Menu will also be set to the same setting.

●The parameters for “INDICATION” and “DISPLAY” are the same as in the description on pg. 20.

●The “TIME CODE” setting also makes the time code appear/disappear during recording.