JVC GR-DVL9200 specifications Self-Timer, EN21

MENU/BRIGHT Dial

EN21

Self-Timer

Recording Start/

Stop Button

Power

Switch

5S

OFF

YALP

Lock Button

Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.

1 Set the Power Switch to “ ” or “5S” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

•You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while self- recording with the viewfinder pushed back.

2 Press MENU/BRIGHT. The Menu Screen appears.

3 Rotate MENU/BRIGHT to select “ ”, and press it. “MODE MENU” appears.

4 Rotate MENU/BRIGHT to select “SELF-TIMER”, and press it. The Sub Menu appears. Rotate MENU/ BRIGHT to select “ON”, and press it. Selection is complete. When the highlight bar is on “1RETURN”, press MENU/BRIGHT twice to close the Menu

RECORDING

Display

MODE MENU

	1RE TURN			Menu Screen
		REC MODE
	W I DE MODE
		ZOOM
		D I S
	GA I N UP		OF F
		SE L F – T I MER
		F LASH
		DAT E / T I ME4
		SYS TEM4
MANUAL
			REC
			444
				Self-Timer
				indication

When the Recording Start/Stop Button or SNAPSHOT is pressed, the tally lamp changes as shown:

Screen.

5 To engage the Self-Timer for video recording, press the Recording Start/Stop Button. After 15 seconds, the beep sounds and video recording starts. To stop Self- Timer recording, press the Recording Start/Stop Button again. The camcorder re-enters Record- Standby mode.

OR

Press SNAPSHOT. After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder re-enters Record-Standby mode.

6 To end Self-Timer recording, select “OFF” in step 4 or set the Power Switch to “OFF” or “”.

NOTE:

If “BEEP/TALLY” is set to “OFF” (☞ pg. 20), the beep does not sound and the tally lamp does not light.

Begins blinking	4 Blinks quickly (Self-		4Turns off (Self-Timer
(Self-Timer starts)		Timer shooting		snapshot recording starts)
		starts soon)
	4		4 Stops blinking and stays on
				(Self-Timer video recording
		After approx. 15 sec.
				starts)