JVC GR-DVL9200 specifications Possible Causes

							EN	55
	SYMPTOM		POSSIBLE CAUSES		CORRECTIVE ACTION
30. Images on the LCD monitor		30. • In places subject to low		30. • Adjust the brightness and
appear dark or whitish.		temperature, images become			angle of the LCD monitor
		dark due to the characteristics			(☞ pg. 12, 13).
		of the LCD monitor. When this
		happens, the displayed colours
		differ from those that are
		actually recorded. This is not a
		defect of the camcorder.
		• When the LCD monitor's
		fluorescent light reaches the
		end of its service life, images
		on the LCD monitor become
		dark. Consult your nearest JVC
		dealer.
31. The rear of the LCD monitor		31. • The light used to illuminate the		31. • Close the LCD monitor to turn
is hot.		LCD monitor causes it to			it off or set the Power Switch
		become hot.			to “OFF”, and let the unit cool
					down.
32. The indicators and the image		32. • This may occur when the		32.
colour on the LCD monitor		surface or the edge of the LCD				————
are not clear.		monitor is pressed.
33. The LCD monitor or		33. • Certain Fade/Wipe effects,		33. • Re-read the sections covering
viewfinder indications blink.		certain modes of Programme			Fade/Wipe effects,
		AE with special effects, “DIS”			Programme AE with special
		and other functions that cannot			effects and “DIS” (☞ pg. 19,
		be used together are selected		25, 26).
		at the same time.
34. Coloured bright spots appear		34. • The LCD monitor and the		34.
all over the LCD monitor or		viewfinder are made with
the viewfinder.		high-precision technology.
		However, black spots or bright
		spots of light (red, green or
		blue) may appear constantly				————
		on the LCD monitor or the
		viewfinder. These spots are not
		recorded on the tape. This is
		not due to any defect of the
		unit. (Effective dots: more than
		99.99 %)
35. During recording, sound		35. • The optional headphones are		35. • Connect the optional
cannot be heard.		not connected to the			headphones to the head-
		headphones connector.			phones connector
		• The sound volume of the			(☞ pg. 50, 58).
		headphones connector was not			• Adjust the sound volume
		adjusted appropriately. The			during playback (☞ pg. 31).
		sound volume at this point is
		the same as the level it was
		adjusted to during playback.
36. Play, Rewind and Fast-		36. • The Power Switch is not set to		36. • Set the Power Switch to
Forward functions do not		“	”.		“	” (☞ pg. 31).
work.
37. The tape is moving, but		37. • Your TV has AV input		37. • Set the TV to the mode or
there is no picture.		terminals, but is not set to its			channel appropriate for video
		VIDEO mode.			playback (☞ pg. 34, 35).
		• The cassette holder cover is			• Close the cassette holder
		open.			cover (☞ pg. 9).

CONTINUED ON NEXT PAGE