JVC GR-DVL9200 specifications EN7, Using the Battery Pack, Using AC Power, Information

To DC OUT connector

BATT. RELEASE

Button

1 3 2

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

INFORMATION:

VU-V856KIT is a set composed of the BN-V856U battery pack and AA-V80EG or AA-V80EK AC Power Adapter/Charger. Read the VU-V856KIT’s instruction manuals before using.

It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/ Charger. Use the optional AA-V80EG or AA-V80EK AC Power Adapter/Charger.

EN7

USING THE BATTERY PACK

1	Tilt the viewfinder upward 1.
2	With the arrow on the battery pack pointing
	downward, push the battery pack slightly against the
	battery pack mount 2, then slide down the battery
	pack to attach it 3.
	•If the battery pack is attached with its			mark set
	in the wrong direction, a malfunction may occur.
To Detach The Battery Pack . . .
.... tilt the viewfinder upward 1 and slide the battery
pack up slightly while pressing BATT. RELEASE to
detach it.					STARTED
Approximate recording time
Battery pack		LCD monitor on/	LCD monitor off/
		Viewfinder off	Viewfinder on		GETTING
BN-V607U		1 hr. 5 min.	1 hr. 20 min.
BN-V615U		2 hrs. 10 min.	2 hrs. 40 min.
BN-V628U		3 hrs. 50 min.	4 hrs. 30 min.
BN-V856U		7 hrs. 30 min.	9 hrs.

NOTES:

●Recording time is reduced significantly under the following conditions:

•Zoom or Record-Standby mode is engaged repeatedly.

•The LCD monitor is used repeatedly.

●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

USING AC POWER

Use the AC Power Adapter/Charger (connect as shown in the illustration).

NOTES:

● The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

● For other notes, ☞ pg. 6.

To AC outlet

Power cord

AC Power

Adapter/Charger

AA-V67EG or

AA-V67EK

To battery	DC cord
pack mount