JVC GR-DVL9200 specifications EN19, Mode Menu, On Next

EN19

Menu Screen Explanations

MODE MENU

FOCUS		Refer to “Focusing” (☞ pg. 28).
EXPOSURE		Refer to “Exposure Control” and “Iris Lock” (☞ pg. 29).
W.BALANCE		Refer to “White Balance Adjustment” and “Manual White Balance Operation”
		(☞ pg. 30).
FADER/WIPE		Refer to “Fade/Wipe Effects” (☞ pg. 26, 27).
P.AE/EFFECT		Refer to “Program AE With Special Effects” (☞ pg. 25).
FLASH ADJ.		Refer to “Flash Brightness Adjustment” (☞ pg. 23).
REC MODE*		Allows you to set the recording mode (SP or LP) depending on your preference
		(☞ pg. 10).
WIDE MODE	OFF	Records with no change in the screen ratio. For playback on a TV with a normal
		screen ratio.
	CINEMA	Inserts black bands at the top and bottom of the screen. During playback on wide-
		screen TVs, the black bands at the top and bottom of the screen are cut and the
		screen ratio becomes 16:9. When using this mode, refer to your wide-screen TV’s
		instruction manual. During playback/recording on 4:3 TVs/LCD monitor/
		viewfinder, black bands are inserted at the top and bottom of the screen and the
		image appears like a letterboxed 16:9 movie.
	SQUEEZE	For playback on TVs with an aspect ratio of 16:9. Naturally expands the image to
		fit the screen without distortion.			appears. When using this mode, refer to your
		wide-screen TV’s instruction manual.			During playback/recording on 4:3 TVs/LCD
		monitor/viewfinder, the image is elongated vertically.
ZOOM	10X	When set to “10X” while using digital zoom, the zoom magnification will reset to
		10X since digital zoom will be disengaged.
	40X	Allows you to use the Digital Zoom. By digitally processing and magnifying
		images, zooming is possible from 10X (the optical zoom limit), to a maximum of
		40X digital magnification.
	100X	Allows you to use the Digital Zoom. By digitally processing and magnifying
		images, zooming is possible from 10X (the optical zoom limit), to a maximum of
		100X digital magnification.
DIS	ON	To compensate for unstable images caused by camera-shake, particularly at high
		magnification.
		NOTES:
		● Accurate stabilisation may not be possible if hand shake is excessive, or under
		the following conditions:
		•When shooting subjects with vertical or horizontal stripes.
	OFF
		•When shooting dark or dim subjects.
		•When shooting subjects with excessive backlighting.
		•When shooting scenes with movement in various directions.
		•When shooting scenes with low-contrast backgrounds.
		● Switch off this mode when recording with the camcorder on a tripod.
		● The “	” indicator appears blinking if the Stabilizer cannot be used.
GAIN UP	OFF	Allows you to shoot dark scenes with no picture brightness adjustment.
	AGC	This is automatically activated during Full Auto mode. The overall appearance
		may be grainy, but the image is bright.
	AUTO	The shutter speed is automatically adjusted (1/25 — 1/200 sec.). Shooting a
		subject in low or poor lighting at 1/25 sec. shutter speed provides a brighter image
		than in the AGC mode, but the subject’s movements are not smooth or natural.
		When set to this mode, “		” is displayed.

RECORDING

* Menu settings are also effective when the Power Switch is set to “ ”.

: Factory-preset

CONTINUED ON NEXT PAGE