JVC GY-DV5001 manual Magnified Status Indications on the LCD Monitor

2. CONTROLS, INDICATORS AND CONNECTORS

2-6 Indications on the LCD Monitor and in the Viewfinder (Cont’d)

No.	Item	Contents
4	Time/Date indication	Recorded data are displayed during playback, fast forward, and rewind.
		(Only when the DATE REC item is set to OFF (☞ See page 79))
		During recording, the data from the DV connector is displayed. (GY-DV5001
		only)
		In the stop mode, the current data is displayed.
		Whether or not the date and time should be displayed and the display style
		are set on the TIME/DATE menu screen.
		When the date and time have not been set, the following indication appears.
		– – / – – / – – – – : – – : – –
5	Audio sampling frequency indication	The audio sampling frequency used for the recording is displayed during
		playback.
		(32 K, 48 K, 44.1 K)
6	Audio level meter indication	Displays the audio level meters during playback.
		Whether or not to display this item is set with the AUDIO item on the LCD/
		VF (2/2) menu screen.
7	VTR mode indication	Indicates the VTR operation status
		[STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, BSRH, – – – (No
		tape loaded)
8	Event display	BLANK SEARCH : Indicates that blank search operation is in progress.

■Magnified Status Indications on the LCD Monitor

The characters on the status screens can be showed alone in magnified size on the LCD monitor.

1

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

25600K 1/8 ND

.3 5600K

.4 5600K 1/64 ND

SHUTTER STATUS

						LCD	BRIGHT	DISPLAY
MENU
					AUDIO			PULL
					LEVEL	FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
NORMAL		NORMAL		VTR		CH-1	CH-2
SPOT L		COMPRESS		CAM			AUTO
						MANUAL

2

CH1
				OVER
		L - ∞ 40 30 20 10	0	dB
	48k
CH2
				OVER

FREETC12H34M3410S F

PLAY

SP213min 109V.

POWER VTR

ON OFF

DISPLAY button

		■ When the DISPLAY button is pressed while the Status (0, 1,
		2, 3) screen is shown in the Camera mode, or a status screen
		is shown in the VTR mode, the displayed contents change
		every time the DISPLAY button is pressed.
		Only image displayed → Characters shown enlarged
		↑
			Image and characters displayed ←
No.	Item		Contents
1	Audio Lock Indicator	Displayed during recording and playback when the audio signal is locked
		to the video signal.
2	Time Code Generator Setting Indicator	Indicates the set status of the TC GENE switch on the side section.
		FREE: TC GENE switch is set to PRESET-FREE RUN MODE.
		RECR: TC GENE switch is set to PRESET-REC RUN MODE.
		REGN: TC GENE switch is set to REGEN MODE.

E-24