JVC GY-DV5001 manual 11-6CAMERA Process Menu Screen

11. MENU SCREENS

11-6CAMERA PROCESS MENU Screen

The CAMERA PROCESS menu screen is only displayed in the Camera mode.

Item			Function	Variation Range	Initial Setting
MASTER	Adjusts the pedestal level (master black), which is the reference of black.			MAX (10)	NORMAL
BLACK	● To increase the pedestal level .... Increase the number. (UP)			9
	● To decrease the pedestal level ... Decrease the number. (DOWN)			to
				NORMAL (0)
				to
				–9
				MIN (–10)
DETAIL	Adjusts the detail enhancement level.			MAX (10)	NORMAL
	● To sharpen details ....................... Increase the number. (UP)			9
	● To soften details .......................... Decrease the number. (DOWN)			to
				NORMAL (0)
		Note:
				to
	When LOLUX is ON, “FIX” is displayed and setting is not possible.
				–9
				MIN (–10)
DTL. V/H	Sets the direction, horizontal (H) or vertical (V), in which stronger detail			H-MAX (5)	NORMAL
BALANCE	enhancement is applied.			4
	To strengthen the H enhancement ...... Increase the number (UP).			to
	To strengthen the V enhancement ...... Decrease the number (DOWN).			NORMAL (0)
				to
		Note:
	When LOLUX is ON, “FIX” is displayed and setting is not possible.			–4
				H-MIN (–5)
SKIN DTL	Sets the Skin Detail function to ON or OFF.			ON	OFF
DETECT	ON :Skin Detail function activated.			OFF
	OFF :Skin Detail function not activated.
	☞ See “Using the Skin Detail Function” on page 89.
SCAN	Increases the vertical resolution.			VIDEO	VIDEO
	● VIDEO		:Vertical resolution 450 lines.	FRAME MODE

●FRAME MODE :Vertical resolution 540 lines

		Note:
	In the FRAME MODE the bright sections may be coloured depending
	on the colour temperature of the subject.
WHITE CLIP	Sets the point where white clipping is to take place for an input video		108%	108%
	signal with a high luminance level.		100%
	108% :The luminance level is white-clipped at the point of 108%.
	100% :The luminance level is white-clipped at the point of 100%. If the
		screen appears too white even with the point set at 108%, set the
		point at 100%.
KNEE	Sets the knee point (brightness level) when the AUTO KNEE function is		100%	100%
POINT	set to OFF.		96%
			92%
			88%
			84%
			80%
ADVANCED	Displays the ADVANCED PROCESS Screen.		–––––	–––––
PROCESS	☞ See “ADVANCED PROCESS Screen” on page 73.
PAGE BACK	The TOP MENU returns when the SHUTTER dial is pressed with the		–––––	–––––
	cursor at this position.

E-72