JVC GY-DV5001 manual Others Menu Screen

11. MENU SCREENS

11-14 OTHERS Menu Screen

The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen)

■OTHERS (1/2) Menu Screen

Item		Function	Variation Range	Initial Setting
OUTPUT	Selects whether characters should be displayed on the screen of a monitor		OFF	OFF
CHAR.	connected to MONITOR OUT connector or Y/C OUT connector.		ON
	OFF : No on-screen-display
	ON : On-screen-display
NET REMOTE	Set when the optional Network Pack KA-DV5000 is attached. Selects		OFF	OFF
	whether the GY-DV5000 should be controlled by an external signal input		ON
	via the network pack.
	OFF : Not controlled.
	ON : Controlled. (Operation from the main unit is disabled.)
DV REC	Selects whether or not the VTR trigger command should be output through		OFF	ON
TRIGGER	the DV connector. Set to ON when the GY-DV5000’s DV signal should be		ON
	recorded on another component for backup.
	OFF : VTR trigger command is not output.
	ON : VTR trigger command is output.
	* Set this item to OFF, when the Backup Recording function of BR-DV600A
	or BR-DV3000 is used.
LONG PAUSE	Selects the time (minutes) before the tape protect mode (drum head		3MIN	30MIN
TIME	rotation stopped) is engaged when the record-standby condition continues.		30MIN
	3MIN : 3 minutes
	30MIN: 30 minutes
	* When used in a cold environment or when the stopped or STILL status
	continues,the setting will be 3 minutes regardless of the setting on the
	menu.
REM FF/REW	Selects the operation when the FF or REW command is received when		FF/REW	FF/REW
MODE	the GY-DV5000 is remote controlled using a non-linear editing controller.		SEARCH
	FF/REW	: Fast forward or rewinding is executed. Normally, this setting
		is used.
	SEARCH : FWD search or REV search is executed.
		Use this setting when detection of the beginning of programs
		(cue-up) works less than satisfactorily when this item is set
		to FF/REW.
STEP SLOW	Selects the amount of frames advanced in the STILL mode.		FIELD	FRAME
MODE	(Frame advance is only available with an external remote control signal.)		FRAME
	FIELD	: Field-by-field frame advance.
	FRAME : Frame-by-frame frame advance.
NEXT PAGE	To display the OTHERS (2/2) menu screen, align the cursor with this item		–––––	–––––
	and then press the SHUTTER dial.
PAGE BACK	The TOP MENU screen returns when the SHUTTER dial is pressed while		–––––	–––––
	the cursor is at this position.

E-80