JVC GY-DV5001 manual Operation Connections, Settings, Date and time data, Time code

9. USING EXTERNAL COMPONENTS

When Using the GY-DV5001 as RECORDING Unit (Dubbing From Another Videocassette)

OPEN

EDITSEARCH

MONITOR

FILTER

1 3200K
2 5600K	/	ND
.3 5600K
.4 5600K	/	ND
SHUTTER		STATUS								MODE
MENU							LCD	BRIGHT	DISPLAY
						AUDIO			PULL
						LEVEL				VTR
							FRONT		OPEN
AUTO IRIS		FULL AUTO	BLACK	LOLUX	CH-1	CH-2		REAR
							CH-1	CH-2
BACK L			STRETCH		MODE		AUDIO INPUT
							AUDIO SELECT
NORMAL			NORMAL		VTR		CH-1	CH-2
SPOT L			COMPRESS		CAM		MANUAL
								AUTO

CAM

POWER VTR

ONOFF

MODE switch

Date and time data:

Data transmitted from the playback unit is recorded.

Time code:

The data generated by the GY-DV5001’s time code generator

is recorded.

Time code

00:00:00:00

REC 01/02/03 01:23:45

Date and time

1. Turn ON both units.

2. Place the GY-DV5001 in the VTR MODE.

Press the MODE switch upward to turn on the VTR indicator.

3. Insert the videocassettes.

GY-DV5001: Insert the videocassette to be dubbed to.

Playback unit: Insert the recorded videocassette.

4. Connect the units with the DV cable.

5. Start playback on the playback unit.

For details, see the instructions to the unit used for playback.

●The playback picture from the playback unit appears on the GY-DV5001’s LCD monitor and viewfinder screen.

6.Press the VTR trigger on the GY-DV5001 to start recording. ■ To temporarily pause the recording, press the VTR trigger. ■ To restart the recording, press the VTR trigger again.

7.When dubbing is completed.

Press the VTR trigger or the STOP button on the GY- DV5001 to stop recording, and then stop playback on the playback unit.

MEMO:

Depending on the player, sound may not be heard momentarily from this unit when switching modes from STILL to PLAY.

Backup Recording of the GY-DV5000’s Camera Image and Sound Through the DV Connector

The GY-DV5000’s camera image and sound can be recorded for backup on another component that is equipped with DV connector. Recording operation is performed on the backup equipment simultaneously with performance of the recording operations on the GY-DV5000.

Master unit

Operation

Connections

Backup unit

DV cable

Signal flow

Start and stop of recording on the backup unit takes place in accordance with the operation of the VTR trigger button on the master unit.

Start and stop of recording on the backup unit takes place in accordance with start and stop of recording on the master unit. (Depending on the GY-DV5000/5001 or the backup unit, the image, audio, and/or time code may deviate from what they should be at the points where the recording is started or stopped.)

Use the GY-DV5000 as the master unit.

Connect the master unit and the backup unit with a DV cable

Settings

■Master unit (GY-DV5000)

●Place in CAMERA mode.

●Set the DV REC TRIGGER item on the OTHERS (1/2) Menu Screen to ON.

■Backup unit

●Place in DV signal input mode.

* Depending on the used component, it may be necessary to set “REMOTE SELECT”.

●When BR-DV600A or BR-DV3000 is used, set the Backup Recording function to OFF.

●Insert the tape and set to STOP or REC PAUSE status.

MEMO:

●When the backup recording is started, the “TRIGGER TO DV” indication is shown on the LCD or in the viewfinder for 3 seconds.

●When the Backup Recording function of BR-DV600A or BR-DV3000 is used, the DV REC TRIGGER item on the GY-DV5000’s OTHERS (1/2) Menu Screen should be set to OFF.

●If the backup device is equipped with a feature to record time codes input from the DV IN/OUT terminal (TC DUPLICATE feature), time code data the same as on the master side can be recorded.

●When using BR-DV600A as a backup device and switching GY-DV5000 from the EDIT SEARCH or PLAYBACK mode to the RECORD mode, noise will be noticed on the monitor output screen of BR-DV600A (backup will be correctly recorded).

E-63