JVC GY-DV5001 manual Fast-Forward, Rewind, Blank Search

8. PLAYBACK MODE

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

25600K 1/8 ND

.3 5600K

.4 5600K 1/64 ND

SHUTTER STATUS

						LCD	BRIGHT	DISPLAY
MENU
					AUDIO			PULL
					LEVEL	FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
				VTR		AUDIO SELECT
NORMAL		NORMAL				CH-1	CH-2
SPOT L		COMPRESS		CAM			AUTO
						MANUAL

POWER VTR

ON OFF

BLANK SEARCH REW STOP FF PLAY STILL

REW button FF button

8-2 Fast-Forward, Rewind

■Press the FF button in the stop mode to fast forward the tape. Press the REW button in the stop mode to rewind the tape.

■Press the STOP button to stop fast forwarding or rewinding.

MEMO:

●When the tape approaches the end during fast forwarding or rewinding, the tape speed decelerates to protect the tape.

●The time required for fast forwarding and rewinding may become longer when used in a cold environment. This is not a malfunction.

8-3 Search

■Press the FF button in the play mode or still mode to search the tape in the forward direction. Playback takes place while fast forwarding.

Pressing the REW button executes search of the tape in the reverse direction. Playback takes place while rewinding.

(Each press on the button switches the speed to ⋅ 5, ⋅ 10, and ⋅ 20.)

■Press the PLAY button to resume normal playback.

■Press the STOP button to stop.

MEMO:

●To output sound during the search, set the A.OUT AT SEARCH item on the AUDIO menu screen to ON.

●Block noise may appear in the picture or the image may freeze during the search.

8-4 Blank Search

BLANK SEARCH button

BLANK SEARCH REW STOP FF PLAY STILL

Status screen

	BLANK SEARCH
	12.2V
BSRH	01/02/03 AM––:––:––

Blank search operation indicator

This function can be used to locate blank portions (unrecorded portions) on the tape, such as the end of a recording.

1. Engage the stop or STILL mode.

2. Press the BLANK SEARCH button.

●Blank search starts.

When a blank part (unrecorded part) on the tape is detected, the unit enters the STILL status in the VTR mode and the Standby status in the CAM mode.

■To stop blank search, press the STOP button.

MEMO:

●“BLANK SEARCH” is indicated on the LCD monitor and in the viewfinder during blank search. (When the Status screen is shown.)

●To prevent that images will be missing, overwrite from about 3 seconds before the point where the previous recording ends.

E-60