JVC GY-DV5001 manual Audio Input Signal Selection, Line, Mic

6. SETTING AND ADJUSTMENTS BEFORE SHOOTING

6-7 Audio Input Signal Selection

VF

OFF	ZEBRA
ON	SKIN	AUTO
	AREA	WHITE
		ACCU
		FOCUS
	VTR	AUDIO
		LEVELE CH-1
		5

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

2 5600K / ND

.3 5600K

.4 5600K / ND SHUTTER STATUS

						LCD BRIGHT		DISPLAY
MENU
					AUDIO			PULL
					LEVEL
						FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
NORMAL		NORMAL		VTR		CH-1	CH-2
SPOT L		COMPRESS		CAM		MANUAL
						AUTO

PHONES DV REAR AUDIO IN TALLY

POWER VTR

ON OFF DC IN

DC OUT

FRONT AUDIO IN	CH-1 AUDIO INPUT switch					CH-2 AUDIO INPUT		REAR AUDIO IN
connector								connector
							switch
				LCD BRIGHT		DISPLAY
			MONITOR
			SELECT			COUNTER
			CH-1		FRONT
			MIX			TC
			CH-2		REAR	UB
	CH-1	AUDIO	CH-2	CH-1	CH-2
		LEVEL		AUDIO INPUT
			AUDIO INPUT	AUDIO SELECT		TC GENE.
			FRONT REAR	CH-1	CH-2
	AUDIO INPUT		LINE		AUTO	REGEN FREE
			MIC		MANUAL	REC
			+48V			PRST
	(LINE/MIC) switch

The GY-DV5000 is provided with the FRONT AUDIO IN connector and the REAR AUDIO IN connector for audio input. Two channels of sound can be recorded on the tape in digital PCM format. Using the AUDIO INPUT switch, select for each channel (CH1 and CH2) whether the sound to be recorded should be the sound from the FRONT AUDIO IN connector or the sound from the REAR AUDIO IN connector.

■Selecting the CH-1 channel input sound

Make the selection using the CH-1 AUDIO INPUT switch.

FRONT : The sound from the FRONT AUDIO IN connector is recorded on the CH-1 channel.

REAR : The sound from the REAR AUDIO IN connector is recorded on the CH-1 channel.

■Selecting the CH-2 channel input sound

Make the selection using the CH-2 AUDIO INPUT switch.

FRONT : The sound from the FRONT AUDIO IN connector is recorded on the CH-2 channel.

REAR : The sound from the REAR AUDIO IN connector is recorded on the CH-2 channel.

■Selecting the FRONT AUDIO IN connector and REAR AUDIO IN connector

Select the sound to be input to the AUDIO INPUT connector using the AUDIO INPUT (LINE/MIC) switch. The setting is made individually for both the FRONT AUDIO IN connector

and the REAR AUDIO IN connector.

LINE	: Set to this position when connected to audio
	equipment, etc.
	The reference input level is +4 dBs.
MIC	: Set to this position when using a monaural
	microphone.
	The reference input level is –60 dBs.
+48 V	: Set to this position when a microphone
	(phantom microphone) requiring +48 V DC
	power supply is connected.

CAUTION:

Before connecting a component that does not require +48 V power supply, make sure that the AUDIO INPUT (LINE/ MIC) switch is not set to +48 V.

Neglecting this could cause damage to the connected component.

E-49