JVC GY-DV5001 manual Outputting CH-3, CH-4 Channel Audio, Setting, VTR indicator

Page 61

8. PLAYBACK MODE

8-5 Outputting CH-3, CH-4 Channel Audio

The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. The GY-DV5000 records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input. (GY-DV5001 only)) When the GY-DV5000 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH- 4 channels, the AUDIO SELECT item on the AUDIO menu screen must be set.

.3	5600K
.4	5600K	1/64 ND
SHUTTER			STATUS
	MENU
AUTO IRIS			FULL AUTO

SHUTTER dial STATUS button

TOP MENU screen

––– MENU –––
AUDIO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET	CANCEL
EXIT

AUDIO menu screen

––– AUDIO –––

TEST TONE	ON
AUDIO MODE	32K
A.OUT AT SEARCH	ON
CH1 FRONT VR	ENABLE
WIND CUT	BOTH
AUDIO REF.LEVEL	–20dB
AUDIO SELECT	CH3/4
AUDIO MONITOR	MIX
PAGE BACK

MEMO:

After-recording on the CH-3 and CH-4 channels is not possible.

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

25600K 1/8 ND

.3 5600K

.4 5600K 1/64 ND

SHUTTER	STATUS
						LCD	BRIGHT	DISPLAY
MENU
					AUDIO			PULL
					LEVEL	FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
				CH-1	CH-2	CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
BACK L		STRETCH		VTR		AUDIO SELECT
NORMAL		NORMAL		VTR		CH-1	CH-2
SPOT L		COMPRESS		CAM			AUTO
				CAM		MANUAL

POWER VTR

ON OFF

VTR indicator

Setting

■Confirm that the GY-DV5000 is in the VTR mode. (VTR indicator: On)

1. Press the STATUS button for 1 second or longer to display the TOP MENU screen.

2. Rotate the SHUTTER to align the cursor () with the AUDIO menu, and then press the SHUTTER dial.

●The AUDIO menu screen appears.

3.Rotate the SHUTTER to align the cursor () with the AUDIO SELECT item, and then press the SHUTTER dial.

●The setting area of the selected item starts blinking.

4.Rotate the SHUTTER dial to change the setting.

CH1/2 : To reproduce the sound (CH-1, CH-2) recorded during shooting.

MIX : To reproduce the sound recorded during shooting (CH-1, CH-2) and the after-recorded sound (on CH-3 and CH-4) simultaneously.

CH3/4 : To reproduce the sound after-recorded on CH- 3 and CH-4.

5.When the SHUTTER dial is pressed, the set value is confirmed.

6.To return to the normal screen, use either of the following methods.

●Press the STATUS button or

●Return to the TOP MENU screen and then select the EXIT item before pressing the SHUTTER dial.

E-61

Image 61

Contents LWT0074-001C-H GY-DV5001MANUEL D’INSTRUCTIONS Instrucciones IstruzioniPort Cable Length DV signal input is possible with the GY-DV5001EThese instructions are for the GY-DV5000E and GY-DV5001E Rating plate serial number plate is on the top frame Main Features Connecting a Video Component with DV Connector Main FeaturesAC Operation Battery Pack Operation Optional 11-11Introduction Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Routine and Periodical MaintenanceHead cleaner Tape guides & rollers Time managementUse JVC’s videocassette tapes marked with the or Symbol Battery Pack to be UsedVideocassette to be Used For recording and storing videotapes in the best conditionCondensation Characteristic CCD PhenomenaSmear and Blooming Moire or AliasingFront Section CONTROLS, Indicators and ConnectorsFilter Colour temperature conversion filter control knob Auto WHITE/ACCU Focus switchLens mounting ring/Lens lock lever White BalanceRight Side Section CAM Camera mode indicator Black Black stretch/black compression switchVTR VTR mode indicator Power Power ON/OFF switchRight Side Section Cont’d @ Monitor Select Audio monitor selector switch CH-1/CH-2 Audio Input CH-1/CH-2 audio input selector switch# Counter Counter display switch $ TC GENE. Time code generator setting switchCH1/CH2 Line OUT CH1/CH2 line output connector RCA Monitor OUT Monitor output connector BNCC OUT Y/C output connector 4-pin Left Side SectionTop Section Rear Section Battery holder DV connectorBattery holder lock release knob Breaker Breaker buttonVTR mode Example of display Camera mode Example of displayIndications on the LCD Monitor and in the Viewfinder Status ScreensStatus Screens in the Camera Mode Indications on the LCD Monitor and in the Viewfinder Cont’d Status Screen in VTR Mode Magnified Status Indications on the LCD Monitor Head Cleaning Required Cleaning TapeNtsc Inhibit REC InhibitSafety Zone Indication Camera mode only Auto White Balance Indication Camera mode onlyMenu Setting Screen TOP Menu screen Camera modeS14 x 7.3B12U Zoom Lens OptionalVF-P115B 1.5-Inch Viewfinder OptionalBasic System Basic System Connections and AdjustmentsAttaching the Viewfinder Attaching the Zoom LensPin Hole ViewfinderAttaching the Microphone Provided Attaching the Microphone Using KA-A50UAttaching the Microphone Optional Attaching the Tripod Base Provided Front mount clip Safety lever Lock leverTripod mounting holes Front base mountBattery Pack Operation Optional Power SupplyFlat shape type battery pack Anton-Bauer battery pack AC OperationUsing a Flat Shape Type Battery Pack optional Battery Pack Operation Optional Cont’dAttaching the Battery Pack Using an Anton-Bauer Battery PackDetaching the Battery Pack Battery Pack Continuous Operating Time at 25 ˚C Operating Time with Battery PackRecharging SonyTurning the Power OFF Turning the Power onMode Operation PreparationsLoading the Cassette Cassette Loading and UnloadingREC Save VTROpen knob Unloading the CassetteCassette cover Eject button Viewing the LCD Monitor Adjusting the LCD monitorOpening the LCD monitor Changing the orientation and angle of the LCD monitorSetting the Date and Time Setting, Displaying and Recording the Date and TimeDial MenuClock Adjust menu screen Date Year/Month/Day Setting, Displaying and Recording the Date and Time Cont’dRecording the Date and Time Data Displaying the Time and Date on the ScreenHow to charge Charging the Built-in BatteryAC outlet AA-P250 DC cable Screen Size 43/LETTER Mode Selection Camera SettingsFilter Suitable LocationExternal Monitor Adjustment Viewfinder AdjustmentAdjust the position and angle of the viewfinder Colour video monitorAccu Focus can also be used in the above step Back Focus AdjustmentWhite Balance Adjustment Line Audio Input Signal SelectionMIC Auto mode is selected in the Full Auto shooting mode Recording Level AdjustmentUsing the audio input level control on the front section Monitoring Audio during Recording Monitor Select switchBasic Recording Operation Shooting OperationWhen the power should be turned off When it is required to unload the videocassetteAbout the Quick REC Start Mode Tally lampEdit Search Searching for Recorded Scenes Edit SearchScreen indications during Edit Search Searching the tape in forward directionSetting the time before the tape protection mode is Engaged If the Record-Standby Mode ContinuesHeader REC Function Header REC menu screen contentsDescription Executing the Header REC Function How to set the Header REC menu screenDuring Header REC Colour bar signal of the built-in signal generator Output switchRecording the Colour Bars Playback Procedure Playback ModePower switch Mode switch Display of time codeSearch Fast-Forward, RewindBlank Search VTR indicator SettingOutputting CH-3, CH-4 Channel Audio Shutter dial Status button TOP Menu screenConnecting a Video Component with DV Connector Using External ComponentsDV connector DV cable VC-VDV204 4P-4P, VC-VDV206 4P- 6P Operation Connections SettingsDate and time data Data transmitted from the playback unit is recordedTC GENE. switch Presetting and Recording of Time CodeTime Code Operation Displaying Time CodeTime code hour, min, sec, frame Zero-resetting the Time Code or User’s Bit DataTC Gene switch Set the TC Gene switch inside the cover on the side toReproducing Time Codes RegenMenu Screens 11-1Menu Screen ConfigurationStatus button 11-2Setting Menu ScreensShutter STA Termenu dial Cursor Menu screenReading Out a Menu Settings File Storing Setting ValuesResetting the Menu Settings to the Factory Settings 11-3FILE Manage Menu Screen11-4TOP Menu Screen 11-5CAMERA Operation Menu Screen 11-6CAMERA Process Menu Screen 11-7ADVANCED Process Screen 11-8SKIN Color Adjust Screen11-9AUDIO Menu Screen 11-10 LCD/VF Menu Screen 11-10 LCD/VF Menu Screen Cont’d 11-11 TC/UB/CLOCK Menu Screen Header REC Menu Screen TIME/DATE Menu Screen Others Menu Screen Battery Alarm VRType FrontSetting procedure Features of the Camera SectionWHT.BAL switch Full-Time Auto White Balance FAWAutomatic adjustment Iris Brightness AdjustmentManual adjustment Temporary auto iris adjustmentOperation Adjusting the Shutter SpeedShutter STA TER Set the Shutter item on the Camera Operation menu screen Variable Scan V.SCAN Shooting the Screen Image on a Computer MonitorBand Video monitor Basic operationGain switch Gain Sensitivity AdjustmentSwitch Position Factory-Set Gain Relationship between gain, iris and shutterAutomatic Setting Contents Switch Setup According to Illumination and SubjectSetting the Color and Range of the Skin Detail Function How to Use Skin DetailDetection AreaStatus Using the Skin Detail FunctionDisplay Others Alarm Indications and ActionsScreen indications on the LCD monitor and in the Viewfinder Indication Condition RemedyBlinking Pattern Remaining Battery/Tape Error Code Error Details GY-DV5000 Operation RemedyTally lamp Camera to operate REC/ALARM lamp Battery lamp Alarm Indications and Actions Cont’dAlarm Sound Viewfinder Warning LampsSymptoms Remedy TroubleshootingTape. See Precautions for Use of Head Cleaning Tape on TypeShutter dial Status button Hour Meter DisplayOthers 2/2 menu screen Accumulated drum running timeSpecifications External Dimensions unit mm Specifications Cont’dViewfinder VF-P115B, VF-P116 Power zoom lens YH16 ⋅ 7K12U, YH19 ⋅ 6.7K12U CanonGY-DV5000/GY-DV5001 DV Camcorder