JVC GY-DV5001 manual Executing the Header REC Function, How to set the Header REC menu screen

7. SHOOTING OPERATION

■How to set the HEADER REC menu screen

HEADER REC menu screen

	––– HEADER		REC –––
	START KEY		STOP+VTR
	TC DATA		00:00:00:00
			EXECUTE
	TC CLEAR		CANCEL
	UB DATA		00 00 00 00
			EXECUTE
	UB CLEAR		CANCEL
	BARS TIME		30SEC
	BLACK TIME		30SEC
	PAGE	BACK
Cursor	Item		Set value

1. Display the HEADER REC menu screen.

Press the STATUS button for 1 second or longer to display the TOP MENU screen. Use the SHUTTER dial to select TC/UB/CLOCK menu → HEADER REC menu, and then press the SHUTTER dial.

2. Setting the HEADER REC menu screen.

1Select the menu item.

Rotate the SHUTTER dial to align the cursor () with the item to be set, and then press the SHUTTER dial. ● The setting area of the selected item starts blinking.

2 Changing the setting value.

Rotate the SHUTTER dial to change the setting, and then press the SHUTTER dial.

■ In the case of the TC DATA item and the UB DATA item, the blinking digit position moves when the SHUTTER dial is pressed. When the SHUTTER dial is rotated, the value of the blinking digit changes. After all the digits have been set and the SHUTTER dial is pressed, EXECUTE starts blinking. Press the SHUTTER dial once more to confirm the set value.

3.To terminate the setting, press the STATUS button.

Executing the HEADER REC Function

HEADER REC

During HEADER REC

MEMO:

To stop during HEADER REC operation, press the VTR trigger button or the Stop button.

MEMO:

●The HEADER REC menu screen cannot be opened during HEADER REC recording.

●HEADER REC operation is accepted even during loading of the cassette tape.

●The date and time recorded in the colour bar section will be in accordance with the settings for the DATE REC item on the TIME/DATE menu screen.

●Date and time data are not written during recording of black video signals.

●The test tone (1 kHz sine-wave) recorded in the color bar section will be recorded unrelated to the setting for the TEST TONE item on the AUDIO menu screen.

●The time code preset on the TC/UB/CLOCK menu screen becomes invalid when HEADER REC recording is performed.

●The user’s bits following completion of HEADER REC recording will be the user’s bits value set on the TC/UB/ CLOCK menu screen.

●The running of the time code following completion of HEADER REC recording will be in accordance with the setting of the TC GENE switch.

■The START KEY item on the HEADER REC menu screen should be set to STOP+VTR.

1. Set the MODE switch to CAM mode.

Load the cassette and engage the Record-Standby mode or the Stop mode.

2. While pressing the STOP button, press the VTR trigger button.

●The tape automatically rewinds to the beginning, and HEADER REC operation starts from the beginning of the tape.

After HEADER REC recording is performed for the specified duration only, the Record-Standby mode is engaged automatically.

●During HEADER REC recording, “HEADER REC” is shown (blinking) on the LCD monitor and in the viewfinder.

3.After HEADER REC recording is completed and the Record- Standby mode is engaged, normal recording starts when you press the VTR trigger button.

●When the TC GENE switch is set to either PRESET REC or REGEN, the time code value at the start of the recording will be the time code value set on the HEADER REC menu screen.

FREE RUN: Continuous running.

REC RUN or REGEN: Runs only during REC.

●When the optional network pack KA-DV5000 is connected, the HEADER REC section is also recorded on the CF card when the MPEG REC item on the NETWORK PACK CONFIG menu screen is set to TRIG.

•When the HEADER REC section should not be recorded on the CF card, temporarily set the MPEG REC item to OFF.

For normal recording, make sure to set the MPEG REC item to TRIG or SPLIT.

•When the HEADER REC section is recorded on the CF card, make sure to set the user’s bits for the HEADER REC section and the normal recording section to the same value.

This is because the thumbnail management utilizes the user’s bits values and different values will result in separation of the folder for management of the HEADER REC section and the normal recording section.

E-57