JVC GY-DV5001 manual 11-7ADVANCED Process Screen, 11-8SKIN Color Adjust Screen

11. MENU SCREENS

11-7ADVANCED PROCESS Screen

Item			Function	Variation Range	Initial Setting
CINE MODE	When set to ON, produces gamma curve close to the picture characteristics			OFF	OFF
	of movies.			ON
COLOR	Used to set the colour matrix. When set to ON, colour reproduction			OFF	STD
MATRIX	becomes good. However, noise will increase.			STD
	5 types of colour matrix functions are provided.			WARM
	OFF : The function is OFF
				EXTRA1
	STD : Standard colour matrix
				EXTRA2
	WARM : Colour adjustment with red tinge
				EXTRA3
	EXTRA 1 to 3 : To set a color matrix other that those described above.
			Select the desired option.
		Note:
	When CINE MODE is ON, “FIX” is displayed and setting is not possible.
GAMMA	Compensates for the gamma curve that determines the reproducibility of			MAX (5)	NORMAL
	black colour.			4
	● To enhance the black colour reproducibility. However, halftones will be			to
	lost for white section
				NORMAL (0)
	............... Increase the number
				to
	● When reproducibility of the black colour is not so important
				–4
	............... Decrease the number
				MIN (–5)
		Note:
				OFF
	When CINE MODE is ON, “FIX” is displayed and setting is not possible.
FLARE <R>	For correcting the black level of Rch when the flare phenomenon in which			MAX (10)	NORMAL
	light entering the lens is diffused and results in reflection that colours the			9
	black portions of the image occurs.			to
	To weaken tinge of red ... Increase the number
				NORMAL
	To strengthen tinge of red ... Decrease the number
				to
		Note:
				–9
	When LOLUX is ON, “FIX” is displayed and setting is not possible.
				MIN (–10)
FLARE <B>	For correcting the black level of Bch when the flare phenomenon in which
	light entering the lens is diffused and results in reflection that colours the
	black portions of the image occurs.
	To weaken tinge of blue ... Increase the number
	To strengthen tinge of blue ... Decrease the number
		Note:
	When LOLUX is ON, “FIX” is displayed and setting is not possible.
SKIN COLOR	Pressing the SHUTTER dial once when the cursor is at this position			–––––	–––––
ADJUST	switches the screen to display the SKIN COLOR ADJUST screen.
PAGE BACK	The CAMERA PROCESS menu screen returns when the SHUTTER dial			–––––	–––––
	is pressed with the cursor at this position.

11-8SKIN COLOR ADJUST Screen

Item		Function	Variation Range	Initial Setting
SKIN COLOR	Sets whether it is possible to change the colour used by the Skin Tone		STOP	STOP
DET.	Detail function.		EXECUTE
	EXECUTE:Choose this setting to allow detection of the colour used by
		the Skin Tone Detail function.
	STOP	:Choose this setting to stop detection of the colour used by the
		Skin Tone Detail function.
	☞ See “Using the Skin Tone Detail Function” on page 89.
SKIN COLOR	The setting of this item can only be changed when the SKIN COLOR		WIDE	NORMAL
RANGE	DET. item is set to EXECUTE.		11
	This setting is for adjusting the skin colour range where Skin Tone Detail		to
	functions. (When this item is selected, the area where the Skin Tone Detail		NORMAL
	function is applicable is indicated by zebra patterns on the screen.)		to
	While viewing the zebra pattern range, perform the adjustment.		–11
	Increasing the range ........ Increase the number		NARROW
	Increasing the range ........ Decrease the number
PAGE BACK	The ADVANCED PROCESS menu screen returns when the SHUTTER		–––––	–––––
	dial is pressed with the cursor at this position.

E-73