JVC GY-DV5001 manual Indications on the LCD Monitor and in the Viewfinder Cont’d

2. CONTROLS, INDICATORS AND CONNECTORS

2-6 Indications on the LCD Monitor and in the Viewfinder (Cont’d)

●Status 1

In addition to the information on the Status 0 screen, this screen displays the following items.

No.	Item			Contents
0	Time Code (TC)/User’s Bits (UB) indication	Indicates the time code (h:m:s:frame) or user’s bits data.
		(Example) Time code		TC 00 : 00 : 00 : 00
			User’s bits	UB FF EE DD 20
		Whether or not to display this item is set with the TC/UB item on the LCD/
		VF (2/2) menu screen. Whether the time code or user’s bits should be
		shown is selected with the COUNTER switch inside the side cover.
A	Remaining tape indication	Remaining tape indication (displayed in 1-minute steps)
		This indicator blinks when remaining tape time is equivalent to less than 3
		minutes.
		Whether or not to display this item is set with the TAPE REMAIN item on
		the LCD/VF (2/2) menu screen.
		* When inserting a brand-new tape, the remaining tape time is not indicated.
		When the tape has been run, the indication will appear.
		* The remaining tape indication is to be regarded only as a guide.
		* When the unit is used at low temperatures, it may take a while before the
		indication of the remaining tape time appears.
B	Audio sampling frequency indication	32 K : Indicated when the AUDIO MODE item on the AUDIO menu screen
			is set to 32 K. (Audio is recorded with 12-bit, 32 kHz sampling.)
		48 K : Indicated when the AUDIO MODE item on the AUDIO menu screen
			is set to 48 K. (Audio is recorded with 16-bit, 48 kHz sampling.)
C	Audio level meter indication	Displays the CH-1, CH-2 audio level meters.
		Whether or not to display this item is set with the AUDIO item on the LCD/
		VF (2/2) menu.
D	VTR mode indication	STBY	: In record standby mode (record-pause mode)
		REC	: During recording
		ED.FWD : Edit search in forward direction
		ED.REV : Edit search in reverse direction
		PLAY	: During playback
		FF	: During fast forward
		REW	: During rewind
		STL	: During still picture playback mode
		BSRH	: During blank search
		FWD	: During playback in forward direction (FWD1: About ⋅ 5 speed,
			FWD2: About ⋅ 10 speed, FWD3: About ⋅ 20 speed)
		REV	: During playback in reverse direction (REV1: About ⋅ 5 speed,
			REV2: About ⋅ 10 speed, REV3: About ⋅ 20 speed)
		STOP	: Stop mode (Tape protect mode)
		EJECT	: Cassette being ejected
		– – –	: No tape loaded
E	Iris indicator display	▲ : Iris set higher than normal
		■ : Iris set to normal
		▼ : Iris set lower than normal
F	Iris F-value indication	Indicates the F-number of the connected lens.
		OPEN, F2, F2.8, F4, F5.6, F8, F11, F16, CLOSE
		It is not displayed when the lens is removed. For some lenses, no display
		appears.
		The indication can be switched ON/OFF with the F.NO/IRIS IND. item on
		the LCD/VF (1/2) menu screen.
G	Filter position indication	Indicates the current filter position
		FIL1, FIL2, FIL3, FIL4
		The indication can be switched ON/OFF with the FILTER item on the LCD/
		VF (1/2) menu screen.
H	Standard audio level indication	The level at which audio is recorded on the tape is indicated by “■”.
		–20dB, –12dB			–20dB –12dB
		☞ See “AUDIO REF. LEVEL” on page 74.			❘	❘
				CH 1	■ ■■ ■ ■
				CH 1 ■ ■■ ■ ■ – – – +
				CH 2 ■ ■■ ■ ■ – – – +

E-22