12 EN | GETTING STARTED (cont.) |
| Grip Adjustment |
| 1 Loosen the belt. |
| Pass your right hand through the loop and grasp the |
| 2 grip. |
| Adjust your thumb and fingers through the grip, to |
| 3 easily operate the Recording Start/Stop button and |
| Power Switch and Power Zoom (SHUTTLE SEARCH) |
| Ring. Be sure to tighten the belt to your preference. |
Power 
Switch 
Lock Button
Viewfinder Adjustment
1 Set the Power Switch to “
” or “ 
” while pressing down the Lock Button located on the switch.
2 Pull out the viewfinder fully.
3 Turn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused.
PAUSE
| Tripod Mounting | ||
Dioptre Adjustment |
|
|
|
1 |
|
| |
Control |
| Align the screw on the tripod with the camera’s | |
|
| mounting socket. Then tighten the screw. | |
|
|
| •Some tripods are not equipped with studs. |
CAUTION:
When attaching the camera to a tripod, extend its legs to stabilise the camcorder. It is not advised to use small sized tripods. This may cause damage to the unit by falling over.