38 EN
VIDEO/MEMORY
Switch
Power Switch
| Lock Button |
| MENU Button |
SET/SELECT | +, – Button |
Button |
Display
MEMORY Menu
PROTECT
DELETE
DPOF
FORMAT CANCEL
EXECUTE
RETURN
| FORMAT |
| Confirmation |
FORMAT | – | CANCEL | Screen |
|
EXECUTE
ERASE AL L
EX I ST I NG F I LES?
D.S.C. PLAYBACK (cont.)
Initialising A Memory Card
You can initialise a memory card anytime.
After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.
1Set the VIDEO/MEMORY Switch to “MEMORY”,
then set the Power Switch to “ 
” while pressing down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.
2Press MENU. The Menu Screen appears.
3Press + or – to select “ 
MEMORY” and press SET/ SELECT. The MEMORY Menu appears.
4Press + or – to select “FORMAT” and press SET/ SELECT. The Confirmation Screen appears.
5Press + or – to select “EXECUTE” and press SET/ SELECT. The memory card is initialised. When initialisation is finished, “NO FILES STORED” or “NO SOUND FILES” appears.
•To cancel initialisation, press + or – to select “CANCEL” and press SET/SELECT.
CAUTION:
Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Power Adapter/Charger, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted initialise it.