1Make sure all units are turned off.
2Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 24).
If using a VCR . . . go to step 3. If not . . . go to step 4.
3Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4Turn on the camcorder, the VCR and the TV.
5Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”
in the Menu Screen ( pg. 44, 45).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the
Menu Screen ( pg. 44, 45).
•Playback Sound Mode, Tape Speed And Tape Running Displays for video playback
Or
Type of file, Directory/File Names and Image Number/Total Number of Images for D.S.C. Playback
.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 44, 45).
Or, press DISPLAY on the remote control.
EN25
NOTES:
●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. 11).
●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “ ” or “ ”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
●While the Audio/Video cable is connected to the AV connector, sound cannot be heard from the speaker.
Docking Station Attachment
First align the multi connector and screw on the Docking Station with the camcorder’s multi connector and tripod mounting socket and tighten the screw.
When removing the camcorder, loosen the screw and detach the camcorder.
NOTE:
Multi connector
While the Docking Station is attached to the camcorder, it is not possible to load and unload the memory card. Also, connecting and discon- necting the DV cable are not possible.
Tripod mouting socket
Screw