92 EN | INDEX Indications (cont.) | ||
| Indications | Function |
|
|
|
| |
| INSERT ERROR! | ●Appears if Insert Editing is attempted on a tape recorded in the LP | |
| <CANNOT EDIT | mode. | ( pg. 68) |
| ON A LP RECORDED | ●Appears if INSERT (w) on the remote control is pressed when the erase | |
| TAPE> | ||
| <CHECK TAPE’S ERASE | protection tab is set to “SAVE”. | ( pg. 68) |
| PROTECTION TAB> |
|
|
|
|
| |
|
| ●Appears if dubbing of copyguarded signals is attempted while this | |
|
| camcorder is being used as a recorder. |
|
|
| ●Appears in the following cases when dubbing from a tape to a memory | |
| COPYING FAILED | card (as digital stills or video clips): |
|
| – when no memory card is loaded. |
| |
|
|
| |
|
| – when the memory card's memory is full. |
|
|
| – when the memory card is not formatted. |
|
|
| – when a | |
|
|
| |
|
| Appears if a memory card is not loaded when SNAPSHOT is pressed | |
| MEMORY CARD! | while the Power Switch is set to “ ” or “ | ” and the VIDEO/MEMORY |
|
| Switch is set to “MEMORY”. | ( pg. 28) |
|
|
| |
| PLEASE | Appears when there is a problem with a memory card and its memory is | |
| corrupt, or it has not been initialised. Initialise the memory card. | ||
| FORMAT | ||
|
| ( pg. 38) | |
|
|
| |
|
|
|
|
|
| ●Appears when the Power Switch is set to “ | ” and the VIDEO/MEMORY |
|
| Switch is set to “MEMORY” if there are no image files stored in the memory | |
| NO FILES STORED | card. |
|
| ●Appears if there are no video clip files stored in the memory card when | ||
|
| ||
|
| the video clip mode is engaged by pressing the SET/SELECT button. | |
|
| ●Appears after a memory card is initialised. |
|
|
|
| |
|
| Appears if there are no sound files stored in the memory card when the | |
| NO SOUND FILES | sound effect mode is engaged by pressing the SET/SELECT button or | |
|
| D.SOUND is pressed during video recording. | |
|
|
| |
| Unsupported file! | Appears when a file in a format other than MP3 for digital sound or DCF | |
| for image is selected. |
| |
|
|
| |
|
|
| |
| E01 — E06 | The error indications (E01 — E06) show what type of malfunction has | |
| occured. When an error indication appears, the camcorder turns off | ||
| UNIT IN SAFEGUARD | ||
| MODE REMOVE AND | automatically. Remove the power supply (battery, etc.) and wait a few | |
| REATTACH BATTERY | minutes for the indication to clear. When it does, you can resume using | |
|
| the camcorder. If the indication remains, consult your nearest JVC dealer. | |
|
|
| |
|
| Appears when the camcorder takes more than 60 seconds to recognise | |
| CARD ERROR! | the loaded memory card. Remove the memory card once and insert it | |
| again. Repeat these procedures until no indication appears. If the | ||
|
| ||
|
| indication still appears, the memory card is corrupted. | |
|
|
| |
| CHECK CARD'S WRITE | Appears when you attempt to shoot digital still images when the write | |
| PROTECTION SWITCH | protection tab on the SD Memory Card is set to the “LOCK” position. | |
|
|
|
|