JVC LYT0844-001A specifications 82 EN, VIDEO/MEMORY Switch is

82 EN				TROUBLESHOOTING (cont.)
	SYMPTOM	POSSIBLE CAUSES			CORRECTIVE ACTION
	33. The LCD monitor or	33. • Certain Fade/Wipe effects,			33. • Re-read the sections covering
	viewfinder indications	certain modes of Program AE			Fade/Wipe effects, Program
	blink.	with special effects, “DIS” and			AE with special effects and
		other functions that cannot be			“DIS” ( pg. 41, 48 – 51).
		used together are selected at
		the same time.
	34. Coloured bright spots	34. • The LCD monitor and the			34.
	appear all over the LCD	viewfinder are made with
	monitor or the viewfinder.	high-precision technology.
		However, black spots or
		bright spots of light (red, green
		or blue) may appear
		constantly on the LCD				————
		monitor or the viewfinder.
		These spots are not recorded
		on the tape. This is not due to
		any defect of the unit.
		(Effective dots: more than
		99.99 %)
	35. During recording, sound	35. • The optional headphones are			35. • Connect the optional
	cannot be heard.	not connected to the			headphones to the headphone
		headphones connector.			connector ( pg. 85).
		• The sound volume of the			• Adjust the sound volume
		headphones connector was			during playback ( pg. 23).
		not adjusted appropriately.
		The sound volume at this
		point is the same as the level
		it was adjusted to during
		playback.
	36. Play, Rewind and Fast-	36. • The Power Switch is set			36. • Set the Power Switch to
	Forward functions do not	to “	” or “	”.	“	” ( pg. 23).
	work.	• VIDEO/MEMORY Switch is			• Set the VIDEO/MEMORY
		set to “MEMORY”.			Switch to “VIDEO”.
	37. A memory card cannot be	37. • The Power Switch is set to			37. • Set the Power Switch to
	played back.	“	” or “	”.	“	” ( pg. 30).
		• VIDEO/MEMORY Switch is			• Set the VIDEO/MEMORY
		set to “VIDEO”.			Switch to “MEMORY”.
	38. The tape is moving, but	38. • Your TV has AV input			38. • Set the TV to the mode or
	there is no picture.	terminals, but is not set to its			channel appropriate for video
		VIDEO mode.			playback ( pg. 24, 25).
		• The cassette holder cover is			• Close the cassette holder
		open.			cover ( pg. 14).
	39. The LCD monitor image is	39. • During playback of the			39.
	distorted.	unrecorded portion, High-
		speed Search and still				————
		playback, LCD monitor
		indications appear distorted.
		This is not a defect.
	40. Images on the LCD monitor	40. • The speaker volume is too			40. • Turn the speaker volume
	are jittery.	great.			down ( pg. 23).
	41. Blocks of noise appear	41.			41. • Clean the video heads with an
	during playback, or there is		————		optional cleaning cassette
	no playback picture and the				( pg. 94).
	screen becomes blue.