JVC LYT0844-001A specifications Lens Cover, Press + or to select OFF and press SET, Select

8 EN

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).

Available when the Power Switch is set to “” or “ ” and no cassette is in the camcorder.

Performing any operation during the demon- stration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.

“DEMO MODE” remains “ON” even if the camcorder power is turned off.

To cancel Automatic Demonstration:

1.Set the Power Switch to “ ” while pressing down the Lock Button located on the switch and press MENU. The Menu Screen appears.

2.Press + or – to select “ SYSTEM” and press SET/SELECT. The SYSTEM Menu appears.

3.Press + or – to select “DEMO MODE” and press SET/SELECT. The Sub Menu appears.

4.Press + or – to select “OFF” and press SET/

SELECT.

5.Press + or – to select “ RETURN”, and press SET/SELECT twice. The normal screen appears.

NOTE:

If you do not slide the lens cover down, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.

MENU Button

SET/SELECT Button +, – Button

Power Switch

Lock Button

Sub Menu

DEMO MODE – OF F

ON

Lens Cover

Slide down the lens cover while pressing down the Lock Button located on the cover.

Slide up the lens cover to protect the lens when the camcorder is not in use.

NOTE:

When sliding down the lens cover, be sure not to touch the lens.

Lock Button

Lens Cover