JVC LYT0844-001A specifications Tape To a Memory Card E-Mail Clip Recording, EN61

E-MAIL CLIP REC Button

VIDEO/MEMORY

Switch

Play/Pause

Button (4/6)

SNAPSHOT	Power Switch
Button

Lock Button

Display

E - M AI L CL I P

STANDBY

E - MA I L CL I P

READY

PUSH " SNAPSHOT "

TO RECORD CL I P TO CARD

When the SNAPSHOT Button is pressed.

e

E - MA I L CL I P

RECORD I NG

Storing is complete.

E - MA I L CL I P

COMPLETED

EN61

Dubbing Moving Images Recorded On A

Tape To A Memory Card (E-Mail Clip

Recording)

You can make video clips from recorded video footage and store them in a memory card as files which can be conveniently sent via e-mail.

1 Load a memory card (
pg. 16) and cassette (
pg. 14).

2 Set the VIDEO/MEMORY Switch to “VIDEO”, then

set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

3 Press 4/6 to start video playback, then press E-MAIL CLIP REC to engage the Record-Standby mode. •“E-MAIL CLIP STANDBY” appears and then “E-

MAIL CLIP READY” appears.

4 At the moment you find the image you wish to dub, press SNAPSHOT to start dubbing.

•“E-MAIL CLIP RECORDING” appears.

•The camcorder stops E-Mail Clip Recording automatically after approx. 20 seconds and “E-MAIL CLIP COMPLETED” appears.

•Refer to the instruction manual of the provided software to transfer the video clips to a PC.

To cancel E-Mail Clip Recording . . .

…after step 3, press E-MAIL CLIP REC again or press 5 to stop video playback.

To view video clips stored in a memory card . . .

…during normal playback of image, press SET/SELECT once to engage the video clip mode. “E-CLIP” appears. Then pressing 4/6 can allow you to view the video clips in the LCD monitor or viewfinder; video clips cannot be displayed on a connected TV. (
pg. 31)

•You can look for the desired file using Index Screen (
pg. 32).

NOTES:

●Playback operation cannot be performed during E-Mail Clip Recording.

●If you press 5 or SNAPSHOT while E-Mail Clip Recording is in progress, only the portion which is recorded before 5 or SNAPSHOT is pressed will be stored in the memory card.

●Also, if the end of the tape is reached during E-Mail Clip Recording, that portion will be automatically stored in the memory card.

●If the end of the tape is reached in step 3, the E-Mail Clip Record-Standby mode will be automatically cancelled.

●The video clip files stored with this camcorder are compatible with MPEG4. Some MPEG4 files stored with other devices cannot be played back with this camcorder.

●The video clip cannot be played back when the write protection tab on the SD Memory Card is set to the “LOCK” position. “PLAYING FAILED CHECK CARD’S WRITE PROTECTION SWITCH” appears.

●Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored in the memory card.