JVC LYT0844-001A 58 EN, Dubbing To a VCR, Engage the VCR’s AUX and Record-Pause modes

58 EN

	To AV OUT
To S-VIDEO	Docking Station
OUT

DUBBING

Dubbing To A VCR

1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 24 and 25.

2 Set the VIDEO/MEMORY Switch to “VIDEO”, then

set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3 Engage the VCR’s AUX and Record-Pause modes.

S-Video cable (optional)

To S-VIDEO IN

Audio/Video cable [mini-plug to RCA plug] (provided)

To AUDIO,

VIDEO* IN

VCR

TV

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6 on the camcorder.

5 Press 4/6 on the camcorder and engage the VCR’s Record mode.

6 Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (
pg. 11).

●As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indica- tions do not appear on the connected TV. If they do, they are being recorded onto the new tape.

*Connect when an S-Video cable is not used.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in

the Menu Screen (
pg. 44, 45).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 44, 45).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen (
pg. 44, 45). Or, press DISPLAY

on the remote control.

●You can use Playback Zoom (
pg. 64) or Playback Special Effects (
pg. 65) in step 5.