JVC LYT0844-001A specifications 80 EN, Troubleshooting

80 EN			TROUBLESHOOTING (cont.)
	SYMPTOM	POSSIBLE CAUSES		CORRECTIVE ACTION
	18. The Picture Wipe and	18. • The last selected editing scene		18. • Select Picture Wipe or
	Dissolve functions do not	is ending.		Dissolve before beginning
	work.	• At the end of the last selected		recording. The effects are then
		scene for editing, the Power		automatically activated
		Switch was set to “OFF”.		( pg. 50).
		• The power is off.		• Do not turn off the
				camcorder’s power after
				setting Edit-In and Edit-Out
				points, as they will all be
				erased ( pg. 50).
				• The camcorder automatically
				shuts off after 5 minutes have
				elapsed in the Record-Standby
				mode. Make sure you
				continue operations within
				5 minutes after engaging
				Record-Standby mode
				( pg. 50).
	19. The picture wipe function	19. • The Slow Shutter mode is		19. • Disengage the Slow Shutter
	does not work.	activated.		mode or set “WIDE MODE”
		• “WIDE MODE” is not set to		to “OFF” before preparing to
		“OFF”.		use the Picture Wipe
				( pg. 42, 48, 50).
	20. Scene transition does not go	20. • When using “Picture Wipe/		20.
	as expected.	Dissolve” ( pg. 50), there is
		a delay of a fraction of a
		second between the previous
		record stop-point and the
		Dissolve start-point. This is		————
		normal, but this slight delay
		becomes especially
		noticeable when shooting
		fast-moving subject or during
		rapid panning.
	21. The Video Echo mode does	21. • The Picture Wipe or		21. • Set “WIDE MODE” to
	not work.	Dissolve functions are in use.		“CINEMA	” or “OFF”
		• “WIDE MODE” is set to		mode ( pg. 42).
		“SQUEEZE	” in the Menu	• Do not try to use the Video
		Screen.		Echo mode during a Fade-In
		• A Fade-In or Fade-Out is in		or Fade-Out ( pg. 48, 50).
		progress.