JVC LYT0844-001A specifications 70 EN, Make Connections, Also refer to pg

70 EN USING THE REMOTE CONTROL UNIT (cont.)

Docking Station

To EDIT

To S-VIDEO	To AV OUT
OUT
Editing
cable	Audio/Video
(provided)
	cable
	(provided)
S-Video
cable
(optional)

To AUDIO, VIDEO* and

S-VIDEO IN connectors

To Remote

PAUSE or

R.A.EDIT

VCR

To PAUSE
IN
DISPLAY	TV

MAKE CONNECTIONS

Also refer to pg. 24 and 25.

1 A JVC VCR equipped with a Remote PAUSE connector . . .

... connect the editing cable to the Remote PAUSE connector.

A JVC VCR not equipped with a Remote PAUSE connector but equipped with an R.A. EDIT connector . . .

... connect the editing cable to the R.A.EDIT connector.

A VCR other than above . . .

... connect the editing cable to the remote control’s PAUSE IN connector.

2Insert a recorded tape into the camcorder. Set the VIDEO/MEMORY Switch to “VIDEO”, then set the

Power Switch to “ ” while pressing down the Lock Button located on the switch.

3Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (
pg. 44, 45).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 44, 45).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen (
pg. 44, 45). Or, press DISPLAY on the remote control.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.

* Connect when an S-Video cable is not used.