JVC LYT1325-001A Provided Accessories, How To Attach/Detach The Lens Ring, To attach, To detach

10 EN GETTING STARTED

Provided Accessories	How To Attach The Lens Cap
	To protect the lens, attach the
	provided lens cap to the
	camcorder as shown in the
	illustration.
OR	NOTE:
	To confirm the lens cap is on
	correctly make sure the cap is flush
	to the camcorder.

Place here during shooting.

aAC Adapter AP-V14E or AP-V15E

bPower Cord

cBattery Pack BN-V408U-B

dS/AV/Editing Cable

eAudio Extension Cable X 2 (for connection of optional Headphone And External Microphone
pg. 11)

fUSB Cable

gCore Filter [large] (for USB Cable
pg. 11 for attachment)

hCore Filter [small] (for S/AV/Editing Cable, Audio Extension Cable and AC Adapter’s cord
pg. 11 for attachment)

iCD-ROM

jCable Adapter

kShoulder Strap (
pg. 10 for attachment)

lRemote Control Unit RM-V720U

mLithium Battery CR2025* (for remote control unit)

nMemory Card 8 MB (Already inserted in the camcorder)

oLens Cap (
pg. 10 for attachment)

*A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●Make sure to use the provided cables for connections. Do not use any other cables.

How To Attach/Detach The Lens Ring

The provided lens ring helps block out glare when shooting under bright sunlight, the same way professional photographers do.

To attach:

Align the lens ring with the camcorder’s lens while the index on the lens ring is facing upward, and then screw the ring clockwise a.

To detach:

Turn the ring counterclockwise b.

Normally, use the camcorder with the lens ring only when you are not using the optional wide or telephoto conversion lens.

Index

Ring

Threading