JVC LYT1325-001A manual Troubleshooting, Appears if Audio Dubbing is attempted on a tape

Page 50

50 EN

TROUBLESHOOTING

 

 

 

 

 

 

 

 

 

 

 

 

 

Warning Indications

 

 

 

 

 

 

 

A. DUB ERROR!

 

 

 

 

 

 

 

 

 

<CANNOT DUB ON A LP RECORDED TAPE>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<CANNOT DUB ON A 16BIT RECORDING>

 

 

 

 

 

 

 

 

 

<CHECK TAPE’S ERASE PROTECTION TAB>

Displays the battery remaining power.

 

 

 

 

 

 

 

 

 

● Appears if Audio Dubbing is attempted on a tape

Remaining power level

 

 

 

 

 

 

recorded in the LP mode. ( pg. 43)

 

 

 

 

 

 

 

 

 

High

 

Exhausted

 

● Appears if Audio Dubbing is attempted on a tape

As the battery power comes close to nil, the battery

 

recorded in 16-BIT audio. ( pg. 43)

indicator blinks.

 

 

 

● Appears if A. DUB (D) on the remote control is pressed

When the battery power is exhausted, power turns off

 

when the erase protection tab is set to “SAVE”.

automatically.

 

 

 

( pg. 43)

INSERT ERROR!

Appears when no tape is loaded. ( pg. 15)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”. ( pg. 13)

USE CLEANING CASSETTE

Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 53)

CONDENSATION, OPERATION PAUSED PLEASE WAIT

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

TAPE!

Appears if a tape is not loaded when the Recording Start/ Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and the VIDEO/ MEMORY Switch is set to “VIDEO”.

TAPE END

Appears when the tape ends during recording or playback.

SET DATE/TIME!

●Appears when the date/time is not set. ( pg. 14)

●Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased. ( pg. 14)

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark.

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 43)

Appears if Insert Editing is attempted on a blank portion of a tape. ( pg. 43)

INSERT ERROR!

<CANNOT EDIT ON A BLANK PORTION> <CANNOT EDIT ON A LP RECORDED TAPE> <CHECK TAPE’S ERASE PROTECTION TAB>

●Appears if Insert Editing is attempted on a blank portion of a tape.

●Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( pg. 43)

●Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 43)

MEMORY IS FULL

Appears when the memory card’s memory is full and shooting is not possible.

COPYING FAILED

●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

●Appears in the following cases when dubbing from a tape to a memory card (as digital stills or video clips):

•when no memory card is loaded.

•when the memory card’s memory is full.

•when the memory card is not formatted.

•when a write-protected SD Memory Card is loaded. ( pg. 26)

MEMORY CARD!

Appears if there is no memory card loaded when you attempt to record on a memory card or access data on a memory card.

PLEASE FORMAT

Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialised. Initialise the memory card. ( pg. 28)

NO IMAGES STORED

Appears if there are no image files stored in the memory card when you attempt memory card playback.

Page 49 Page 51
Image 50
Page 49 Page 51
Contents LYT1325-001A EN To deactivate the demonstration, set Demo Mode to OFFDear Customer Program AE with Special Effects Wipe/Fader EffectsBacklight Compensation Navigation FunctionImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedCassettes marked Memory cards marked Before Using This CamcorderSo, for important recordings, we recommend using SP mode It is recommended that you use JVC brand cassette tapesFlash Brightness Adjustment Brightness Adjustment Of The DisplayChanging The Menu Settings White Balance Adjustment Manual White Balance AdjustmentEN Getting Started To open the connector cover, pull the bottomIndex End of the cover, then open itControls IndicatorsConnectors Other PartsDuring D.S.C. Recording Only Clock Icon pg Flash Indicator pgDuring Video Recording Only During E-Mail Clip RecordingW T During Video PlaybackDuring D.S.C. Playback I T / M I X LTo attach Provided AccessoriesHow To Attach/Detach The Lens Ring To detachHow To Attach The Shoulder Strap Audio Extension CableUsing The Battery Pack PowerCharging The Battery Pack Maximum continuous recording timePower-Linked Operation Operation ModeUsing AC Power About BatteriesViewfinder Adjustment Date/Time SettingsGrip Adjustment Tripod Mounting Brightness Adjustment Of The DisplayLoading/Unloading a Cassette To protect valuable recordingsTo protect valuable files available only for SD Memory Card Loading/Unloading a Memory CardClose the card cover LCD Monitor And Viewfinder Basic RecordingTape Remaining Time Zoom EN Video RecordingInterface Shooting Zoom OutRecording From The Middle Of a Tape Normal PlaybackTime Code Video Playback ENShuttle Search If using a VCR, go to . If not, go to stepEN Video Playback Blank SearchBeam Effective Area indoor use Installing The BatteryButtons And Functions Frame-By-Frame Playback Playback Special EffectsSlow-Motion Playback Playback ZoomInterval Shooting To cancel Interval Shooting modeC. Recording EN Approximate Number of Storable ImagesPlayback Of Video Clips Normal Playback Of ImagesAuto Playback Of Images EN D.S.C. PlaybackViewing File Information Index Playback Of FilesRemoving On-Screen Display Folder Folder name  pgTo reset the file name Resetting The File NameEN Additional Features for D.S.C Mail Clip RecordingTo Remove Protection Protecting FilesDeleting Files To Print By Selecting Still Images And Number Of Prints To Reset The Number Of PrintsInitialising a Memory Card Menus without Sub Menus Changing The Menu SettingsRecording Menus Menus with Sub MenusManual Enables thumbnail images to be made manually.  pg EN Menus for Detailed AdjustmentShutter speed is being automatically adjusted, is displayed 5SEC / 15SEC / 30SEC / 60SECWhen the Menu Screen is closed after Demo Mode is turned on  pg , Flash Brightness Adjustment pg , Brightness Adjustment Of The Display  pg , E-Mail Clip RecordingSound Mode and Narration Playback MenusIf C ±0A is selected Features for Recording ENSnapshot Flash EN Features for Recording Flash Brightness AdjustmentSelf-Timer Second RecordingManual Focus Motor Drive ModeSnapshot For Video Recording Exposure ControlBacklight Compensation Iris LockSpot Exposure Control Wipe Or Fader Effects White Balance AdjustmentTo change the setting To return to automatic white balanceBefore continuing Program AE With Special EffectsNavigation Function Variable Shutter Speed 1/250 1/4000To delete thumbnail images To cancel Navigation search midwayNavigation Search To use this camcorder as a recorder EN EditingTo use this camcorder as a player Equipped With a DV Connector Digital DubbingUsing USB cable Using DV cable Connection To a Personal Computer Using USB cableUsing DV cable It is possible to do the following thingsEditing EN Audio DubbingInsert Editing To hear the dubbed sound during playbackYou are now ready to try Random Assemble Editing Set Remote/VCR CodeButtons And Functions RM-V717U Make Connections Connect the editing cable to the Remote Pause connectorConnect the editing cable to the R.A.EDIT connector VCR other than aboveEngage the Stop modes for the camcorder and the VCR Or manually engage the VCR’s Record-Pause modeAutomatic Editing To VCR Diagnosing VCR/Camcorder Timing Adjustment Of VCR/Camcorder Timing For More Accurate Editing Play back the dubbed sceneAdvanced features EN TroubleshootingPower Video and D.S.C. PlaybackViewfinder is pulled out and Priority is set to Other problemsHPush in the memory card a few more times.  pg Appears when the tape ends during recording or playback TroubleshootingAppears when no tape is loaded.  pg Appears if Audio Dubbing is attempted on a tapeTo clean the LCD monitor Cleaning The CamcorderTo clean the exterior To clean the lensLCD Monitor EN CautionsMemory Cards Main Unit AC Adapter EN SpecificationsCamcorder 12, 13 Recording Capacity18, 22 26, 40Victor Company of Japan, Limited
Top Page Image Contents