To choose whether or not the following displays appear on the connected TV
●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 29, 33) Or, press DISPLAY on the remote control to turn on/off the date indication.
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 29, 33)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 29, 33)
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)
●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
Playback Using The Remote Control
The
Installing The Battery
VIDEO PLAYBACK EN 21
Buttons And Functions
A Infrared beam transmitting window
● Transmits the beam signal.
The following buttons are available only when the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button
● Pauses the tape ( pg. 22) | & PLAYBACK | |
Up Button ( pg. 22) | ||
C SLOW Rewind Button ( pg. 22) | ||
D REW Button | ||
● Rewind/Reverse Shuttle Search on a tape ( pg. 20) | ||
● Displays previous file in a memory card ( pg. 24) | RECORDING | |
Left Button ( pg. 22) | ||
E INSERT Button ( pg. 43) | ||
F SHIFT Button ( pg. 22, 44) | ||
G DISPLAY Button ( pg. 21, 40, 45) | ||
H SLOW Forward Button ( pg. 22) | VIDEO | |
I PLAY Button | ||
● Starts Playback of a tape ( pg. 19) | ||
|
The remote control uses one lithium battery (CR2025).
1 Pull out the battery holder by pushing the lock tab.
2 Insert the battery in the holder, and be sure to have the “+” mark visible.
3 Slide the holder back in until you hear a click.
2
1
1 3
Lock tab
● Starts Auto Playback of images in a memory card |
( pg. 24) |
J FF Button |
●Forward/Forward Shuttle Search on a tape ( pg. 20)
●Displays next file in a memory card ( pg. 24)
Right Button ( pg. 22)
K A. DUB Button ( pg. 43)
L STOP Button
● Stops the tape ( pg. 19) |
● Stops Auto Playback ( pg. 24) |
Down Button ( pg. 22) |
Beam Effective Area (indoor use)
When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s
approximate effective distance for |
|
indoor use is 5 m. |
|
NOTE: | Remote sensor |
The transmitted beam may not be effective or may cause incorrect
operation when the remote sensor is directly exposed to sunlight or powerful lighting.
M EFFECT Button ( pg. 22)
N EFFECT ON/OFF Button ( pg. 22)
The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”.
o Zoom (T/W) Buttons Zoom in/out ( pg. 18, 22)
(Also available with the Power Switch set to “PLAY”) p START/STOP Button
Functions the same as the Recording Start/Stop Button on the camcorder.
q S.SHOT Button
Functions the same as SNAPSHOT on the camcorder. (Also available with the Power Switch set to “PLAY”)