JVC LYT1325-001A manual EN Editing, To use this camcorder as a player

40 EN EDITING

Dubbing To Or From A VCR					To use this camcorder as a player
					1 Following the illustrations, connect the camcorder and
					the VCR’s input connectors.
					2 Start playback on the camcorder. ( pg. 19)
To S/AV					3 At the point you want to start dubbing, start recording
					on the VCR. (Refer to the VCR’s instruction manual.)
connector
					4 To stop dubbing, stop recording on the VCR, then stop
			Open the cover.
S/AV/Editing cable			mark		playback on the camcorder.
					NOTES:
(provided)
					● It is recommended to use the AC Adapter as the power
					supply instead of the battery pack. ( pg. 13)
					● To choose whether or not the following displays appear on
					the connected TV
					• Date/time
1	2	3	4	5	Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
					( pg. 29, 33) Or, press DISPLAY on the remote control
					to turn on/off the date indication.
					• Time code
					Set “TIME CODE” to “OFF” or “ON”. ( pg. 29, 33)
				Cable Adapter*	• Indications other than date/time and time code
“Y/C”/“CVBS” Video					Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
					( pg. 29, 33)
Out Select Switch

To use this camcorder as a recorder

To VCR

TV

VCR

A Remote plug: Not connected (When not in use, keep the Remote plug in its protective caddy.)

B To S-VIDEO IN or OUT** C Yellow to VIDEO IN or OUT D Red to AUDIO R IN or OUT E White to AUDIO L IN or OUT

*If your VCR has a SCART connector, use the provided cable adapter. (The provided cable adapter accepts only output signals from this camcorder. To use this camcorder as a recorder, use a commercially available cable adapter.)

**Connect when your TV/VCR has an S-VIDEO IN/OUT connector. In this case, it is not necessary to connect the yellow video cable.

NOTE:

Set the video out select switch of the cable adapter as required:

1 Following the illustrations, connect the camcorder and the VCR’s output connectors.

2 Set “REC MODE” to “SP” or “LP”. (
pg. 29)

3 Set the camcorder’s Power Switch to “PLAY”.

4 Set “S/AV INPUT” to “A/V.IN” or “S.IN”*. (
pg. 29, 32)

*Select “S.IN” when using S-VIDEO OUT connector on your TV/VCR.

5 Press the Recording Start/Stop Button to engage the Record-Pause mode.

●The “ A/V.IN ” or “ S.IN ” indication appears on the screen.

6 Start playback on the player.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start dubbing. The indication rotates.

8 Press the Recording Start/Stop Button again to stop dubbing. The indication stops rotating.

9 Press 8 to return to the normal playback mode.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analogue signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

Y/C: When connecting to a TV or VCR which accepts Y/ C signals and uses an S-Video cable.

CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.