JVC LYT1325-001A manual How To Attach The Shoulder Strap, Audio Extension Cable

		GETTING STARTED	EN 11
How To Attach The Shoulder Strap	How To Attach The Core Filter (for USB Cable and
	Audio Extension Cable)
Follow the illustration.
1 Thread the strap through the eyelet.
	Attach the core filters to the cables. The core filter
2 Fold it back and thread it through the strap guide and	reduces interference.
the buckle.	1 Release the stoppers on both ends of the core filter.

●To adjust the length of the strap, loosen and then tighten

the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

Strap guide

2

Buckle

Stopper

2 Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter.

USB cable and AC Adapter’s cord

Wind the cable (cord) once around the outside of the core filter as shown in the illustration.

3 cm	Core filter (large: USB Cable,
	small: AC Adapter’s cord)

GETTING STARTED

	3
1	Wind once.
	Audio Extension cable
Eyelet
	Wind the cable twice around the outside of the core filter
How To Use The Audio Extension Cable	as shown in the illustration.

When using optional headphones or external microphone, connect to the provided Audio extension cable (with a core filter attached), then connect the Audio extension cable to the camcorder. The core filter reduces interference. (See the right column.)

Audio cable (not provided)

Microphone

Headphones

3 cm Core filter (small)

Wind twice.

●Wind the cable so that it is not slack.

S/AV/Editing cable

3 cm Core filter (small)

3 Close the core filter until it clicks shut.

To (headphones)

Core filter

To MIC

Open the cover.

USB cable and AC Audio Extension		S/AV/Editing
Adapter’s cord	cable	cable

NOTES:

●Take care not to damage the cable.

●When connecting a cable, attach the end with the core filter to the camcorder.