JVC LYT1325-001A manual Operation Mode, Using AC Power, About Batteries, Power-Linked Operation

	GETTING STARTED	EN 13
Using AC Power
	Power Switch Position
Connect the AC Adapter to the camcorder, then connect
	A (Full Auto Recording):
the Power Cord to the AC Adapter as shown in the	Allows you to record using NO special effects or
illustration.
	manual adjustments. Suitable for standard recording.
NOTE:	The “A” indicator appears on the display.
The provided AC Adapter features automatic voltage	M (Manual Recording):
selection in the AC range from 110 V to 240 V.
	Allows you to set various recording functions using the
About Batteries	Menus. ( pg. 29)
	If you want more creative capabilities than Full Auto
DANGER! Do not attempt to take the batteries apart, or
	Recording, try this mode.
expose them to flame or excessive heat, as it may cause
	OFF:
a fire or explosion.
	Allows you to switch off the camcorder.
WARNING! Do not allow the battery or its terminals to
come in contact with metals, as this can result in a short	PLAY:
circuit and possibly start a fire.	● Allows you to play back a recording on the tape.
The Benefits Of Lithium-Ion Batteries	● Allows you to play back a video clip on the memory
Lithium-ion battery packs are small but have a large	card.
power capacity. However, when one is exposed to cold	● Allows you to display a still image stored in the
temperatures (below 10°C), its usage time becomes	memory card or to transfer a still image stored in the
shorter and it may cease to function. If this happens,	memory card to a PC.
place the battery pack in your pocket or other warm,	● Allows you to set various playback functions using
protected place for a short time, then re-attach it to the	the Menus. ( pg. 29)

camcorder.

GETTING STARTED

Operation Mode

To turn on the camcorder, set the Power Switch to any operation mode except “OFF” while pressing down the Lock Button located on the switch.

Lock Button

VIDEO/

POWER/ MEMORY r (Up)

CHARGE lamp

t (Down)

SET

Power Switch MENU

Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/ MEMORY Switch.

VIDEO/MEMORY Switch Position

VIDEO:

Allows you to record on a tape or play back a tape. If

“REC SELECT” is set to “ / ” (
pg. 32), still images are recorded both on the tape and the memory card.

MEMORY:

●Allows you to record in a memory card or access data stored in a memory card.

●When the Power Switch is set to “A” or “M”, the currently selected image size appears.

Power-Linked Operation

When the Power Switch is set to “A” or “M”, you can also turn on/off the camcorder by opening/closing the LCD monitor or pulling out/pushing in the viewfinder.

INFORMATION:

The following explanations in this manual supposes the use of LCD monitor in your operation. If you want to use the viewfinder, close the LCD monitor and pull out the viewfinder fully.